Picture Options
MENU _ _ Picture
ENTER IZ_
ColorTone | : Normal | I_I |
Size | : 16"9 |
|
DigitalNoiseFilter | :Auto |
|
FilmMode | : Off |
|
IIIColor Tone (Cool / Normal / Warm1 / Warm2) Warm1 or Warm2 will be activated when the picture mode is Movie.
Settings can be adjusted and stored for each external device connected to an input on the TV.
IIISize: Your cable box/satellite receiver
may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1 : Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any
NOTE
*After selecting Zoom1, Zoom2 or Wide Fit:
1.Press the !_ button to select Position.
2.Press the ENTERIZ_ button.
3.Press the • or T button to move the picture up or down.
4.Press the ENTERIZ_ button.
5.Press the I_ button to select Reset,
6. Press the ENTER _ button to reset the picture to its default position.
*HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
*Settings can be adjusted and stored for each
external device you have connected to an input on the TV.
IIIDigital Noise Filter (Off / Low / Medium / High / Auto): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on the screen.
When the signal is weak, try other options until the best picture is displayed,
IIIHDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth,
Available only in HDMI mode (RGB signals).
IIIFilm Mode (Off / Auto): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality,
Available in ATV, DTV(interlace), AV, COMPONENT (480i/1080i) and HDMI (1080i),
Picture Reset
(Reset Picture Mode / Cancel)
Resets your current picture mode to it'sdefault settings.
IIIReset Picture Mode: Returns all picture values in the currently selected mode to the default settings.
