Conceptronic C300BRS4A | 802.11n Wireless Broadband Router |
L2TP Parameters | Description |
IP Address | The IP address that will be assigned to your router for this connection, |
| as stated by your ISP. |
Subnet Mask | The IP address of the corresponding Subnet Mask, as stated to you by |
| your ISP. |
ISP Gateway Address | The IP address of the gateway device, as stated to you by your ISP. |
DNS | Enter the Domain Name Server IP address. |
Server IP | The IP address of your ISP’s server computer, as stated to you by your |
| ISP. |
User Name | The account name of the L2PT account that has been assigned to you |
| by your ISP. |
Password | The password of the L2PT account that was supplied to you by your |
| ISP. |
Retype Password | Retype the password that was entered in the L2PT field. Ensure that |
| these two passwords are identical or an error will occur. |
Maximum Idle Time | A value of 0 means that the PPP connection will remain connected. If |
| your network account is billed according to the amount of time the |
| Router is actually connected to the Internet, enter an appropriate Idle |
| Time value (in minutes). This will disconnect the Router after the |
| WAN connection has been idle for the amount of time specified. |
MTU | The Maximum Transmission Unit size may be changed if you want to |
| optimize efficiency for uploading data through the WAN interface. The |
| default setting (1400 bytes) should be suitable for most users. Some |
| user may want to adjust the setting to optimize performance for |
| wireless traffic or when low latency is desired (such as with Internet |
| gaming). It is highly recommended that the user research how |
| adjusting the MTU may affect network traffic for better or worse. |
Connect mode select | Select the desired option: Always on, Manual, or Connect on demand. |
| Most users will want to choose the default connection setting, Always |
| on. |
|
|
44