Conceptronic C300BRS4A | 802.11n Wireless Broadband Router |
Use the Router for DHCP
To use the
The Ending IP Address is the highest IP address number in the pool. Select the desired Lease Time from the
Disable the DHCP Server
To disable DHCP, click the Disabled DHCP Server radio button and then click the Apply button. Choosing this option requires that workstations on the local network must be configured manually or use another DHCP server to obtain IP settings.
If you configure IP settings manually, make sure to use IP addresses in the subnet of the Router. You will need to use the Router’s IP address as the Default Gateway for the workstation in order to provide Internet access.
Create Static DHCP Server rules
You can also create static DHCP Server rules to assign the same IP address every time to the same network client. To create a static DHCP Server rule, enter the MAC Address of the network client in the MAC Address field, or select it from the DHCP Client list if it is connected and press the Clone button.
Enter the IP Address you want to use for the network client. Enter the Hostname for the network client and set the Static DHCP to Enabled. Click Apply to save the static DHCP rule.
Note: If you want to use the
47