PART LIST
1. Plastic Lid with Feeding Hole
2. Pitcher
3. Plastic Ring
4. Blades and Spin Base
5. Motor Drive Coupling
6. Motor Housing
7. 10 Speed Panel Control
To Assemble
WARNING: To avoid damage to the product or serious personal injury:
•Do not activate or plug the product into an electrical outlet until the product is completely assembled.
•The Blades of the product are very sharp; handle with care.
1.Ensure the product is unplugged from the electrical outlet.
2.Place the Motor Housing on a flat, stable surface.
3.Wash and dry the Pitcher.
4.Ensure the Plastic Ring is attached around the Spin Base.
5.Insert the Blades and Spin Base into the bottom of the Pitcher and turn clockwise (follow the arrows inscribed on the bottom of the Spin Base) until the plastic latches of the Pitcher bottom and the Spin Base lock into place.
6.Place the Pitcher onto the Motor Housing ensure the Motor Drive Coupling and the fittings located on top of the Motor Housing are aligned.
7.Twist the Pitcher counterclockwise until the plastic latches of the Pitcher and the
Motor Housing lock into place.
NOTE: Ensure the arrow below the Pitcher handle is aligned with the arrow below the plastic latch of the Motor Housing.
8.Place the Plastic Lid on top of the Pitcher and secure it into position.
NOTE: The Pitcher handle has a slide release mechanism to hold the Plastic Lid to the Pitcher. Make sure the Plastic Lid is always securely in place on top of the Pitcher before operating the product.
3
3 .licuadora su encender de antes asegurada firmemente este padera
.cuidado con manejelas filosas completamente estan licuadora la de navajas Las • .ensamblada.mente
ensamblar Para
VELOCIDADES 10 DE PANEL .7
MOTOR .6
MOTOR DEL ACOPLE .5
BASE Y CUCHILLAS .4
PLASTICO ANILLO .3
JARRA .2
PLASTICA TAPA .1