IMPORTANT SAFEGUARDS

When using your flat iron, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

1.Use iron only for Its intended use.

2.To protect against a risk of electric shock, do not immerse the iron in water or other liquids.

3.The iron should always be turned to “Min” before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.

4.Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing.

5.Always disconnect iron from electrical outlet when filling with water or emptying and when not in use.

6.Do not operate iron with a damaged cord or if the iron has been dropped or dam- aged. To avoid the risk of electric shock, do not disassemble the iron take it to a quali- fied serviceman for examination and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.

7.Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.

8.Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir.

9.If the malfunction indicator goes on, the flatiron is not operating normally. Disconnect from the power supply and have the flatiron serviced by qualified service personnel.

10.The iron must be used and rested on a stable surface.

11.When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.

12.The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.

SPECIAL INSTRUCTIONS

1.To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.

2.If an extension cord is absolutely necessary, a 10-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.

DO NOT let children or untrained persons use the appliance without supervision.

NEVER

immerse the iron, cable or plug in any liquid.

DO NOT

leave the hot iron touching fabrics or very inflammable surfaces.

 

alre mucho r ajust sin

DO NOT leave the appliance unnecessarily plugged in. Disconnect the plug from the

mains when the appliance is not being used.

NEVER

touch the appliance with wet or damp hands.

DO NOT

use the power cord or the appliance in order to pull the plug out of the socket.

DO NOT

leave the appliance exposed to the weather (rain, sun, etc. ).

DO NOT

leave the iron without supervision when it is connected to the power supply.

DO NOT

fill the reservoir with water before removing the plug from the socket.

PLEASE NOTE!

Do not use chemical additive, scented substances or decalcifiers. Failure to comply with the above-mentioned regulations leads to the loss of guarantee.

SAVE THESE INSTRUCTIONS

Page 2
Image 2
Continental Electric CE23151 instruction manual Important Safeguards, Read ALL Instructions Before Using