Continental Electric CE23361 instruction manual Cleaning and Maintenance

Models: CE23361

1 8
Download 8 pages 39.78 Kb
Page 4
Image 4

CAUTION: The water level should not exceed above the MAX line or fall below the MIN line (both lines indicated on the inside of the product). Do not overfill the product. Do not allow the product to boil water until the product is operating dry/empty. Do not operate the product when it is empty. Do not fill the product with anything but water, as serious personal injury and/or property damage may result. Do not use this product to heat oil or butter.

4.Fully close the Lid.

5.Place the product on a flat, steady, stable, heat-resistant surface.

6.Plug the product into a standard 120V AC electrical outlet.

NOTE: A slight odor may be emitted during the first few uses of the product

7.Set the Power Control Knob to the desired position.

To boil water, set the Power Control Knob to the ”High” position. To keep water warm, adjust the Power Control Knob to a lower temperature setting.

Never leave the product unattended while it is in use.

8.After boiling/heating is complete, switch the Power Control Knob to the ”Low” position.

9.Unplug the product from the electrical outlet when it is not in use or is left unattended.

CAUTION: Keep the lid fully closed while pouring hot water to avoid spilling and splashing.

Cleaning and Maintenance:

CAUTION: Always unplug the product from the electrical outlet before cleaning it.

Wash the product in warm, soapy water; then rinse well and dry thoroughly.

Wipe the interior and exterior surfaces of the product’s base with a soft, damp.

Never use abrasive cleaners or pads to clean the product.

Page 4
Image 4
Continental Electric CE23361 instruction manual Cleaning and Maintenance