Continental Refrigerator DL2FE-SS manual Extra-Wide Freezers, Standard Features, DL3FE-SS

FREEZERS

EXTRA-WIDE

FREEZERS

Standard Features

			• Modern, State-of-the-Art Styling Performance
Utilizing Environmentally Safe, CFC-free R-404a Refrigerant			Rated “Plug” Refrigeration System
			• 3" Non-CFC Polyurethane Foam Insulation
			• Chrome-Plated Flow Line Handles
			• Cam-Action Lift-Off Hinges
			• Self-Closing Doors
			• Magnetic Snap-In Door Gasket
			• Cylinder Lock in Each Door
			• Automatic Hot Gas Condensate Evaporator
			• Adjustable 6" Stainless Steel Legs
			• Heavy-Duty, Epoxy-Coated Steel Shelves
			• External Digital Thermometer
		DL3FE-SS	• Automatic Electric Defrost
	DL1FE-SS	DL2FE-SS
DL1FX-SS
	Optional Features & Accessories		Standard (S/S Front, Aluminum Ends & Interior)
	• Half Door	• Pass-Thru	Suffix SA (S/S Exterior, Aluminum Interior)
	• Remote	• Consult Factory	Suffix SS (S/S Exterior & Interior)
	• Hinged Glass Display Door

Refrigeration System

A “performance rated” air cooled hermetically sealed, capillary type refrigeration system is installed on the top of each freezer. Plasticized fin coil and air circu- lating fans are contained within a concealed “plug” type insulated housing, readily accessible on the top of the cabinet and separate from the food zone to increase food storage capacity. The entire “plug” sys- tem is fully charged with refrigerant and mounted on a sturdy steel, rail-type base which can be easily removed if refrigerator conversion is desired. Freezers are designed to maintain 0 degrees Fahrenheit (-18°Centigrade) while operating with an unrestricted air supply in a maximum ambient tem- perature of 100° Fahrenheit Automatic electric defrost timer initiates defrost cycles at predetermined inter- vals. All condensate water is evaporated by an auto- matic, non-electric, corrosion-resistant condensate evaporator. A strict quality-assurance team inspects all materials and components to certify that each model conforms to the most exacting standards. All models are factory performance tested for a minimum of 16 hours prior to crating.

Cabinet Construction

All materials are of top quality, assembled to conform with strict quality-assurance requirements. The cabi- net front and doors are constructed of heavy-gauge polished stainless steel for durability. All cabinet joints and seams are sealed vapor tight. Case is of all metal, welded construction and internally supported and braced for a rigid unit construction. Cabinet design eliminates overlapping panels with raw edges. Cabinet body and doors are insulated with non-CFC, foamed- in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy effi- ciency. Full-length louvered air grille located above the doors allows equal air circulation to the condens- ing unit. Easily removable, low-wattage, anti-sweat door heaters concealed by a non-metallic, non-con- ductive, high-impact thermal breaker strip eliminate condensate build up on the cabinet front. Automatic interior lighting is controlled by door openings. Cabinets are equipped with 6-inch adjustable stain- less steel legs.

Shelving

Shelves are designed for heavy-duty use with .306" diameter frame and brace members and .140" diam- eter fill wires spaced 3/4" apart. Shelves are welded steel and epoxy-coated for a durable, long, rust-free service life. Adjustments are in 1/2" increments and a wide door opening allows the use of a variety of optional pan and tray slide types.

Door Construction

Door shells are constructed of heavy-gauge stainless steel and are internally braced and urethane-foam- insulated for rigidity. Door corners are of welded con- struction and polished. Replaceable snap-in door gaskets are self-adjusting, heavy-duty, magnetic type. Door handles and hinges are chrome-plated and non- corrosive. Doors are provided with built-in cylinder locks which are keyed alike. Hinges are cam action, lift-off type featuring positive safety stop at 120 degrees.