DESCRIPTION
An adjustable
For remodel applications. Insulation must be kept 3” from all sides and at least 1” above the housing.
SPECIFICATION FEATURES
Catalog #
Project
Comments
Prepared by
Type
Date
A.... Housing
Housing and junction box are aluminum, trimless meshplate is steel with powder coated finish. Perforated meshplate allows for trimless installation in drywall/ plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled
B.... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.
D... Electrical
Integral electronic or magnetic low voltage transformers. Transformers and electrical are mounted in a separate metal enclosure box attached to the junction box with 18” of flexible conduit. Transformer enclosure includes a separated wiring compartment and two knockouts for conduit entry. Transformer enclosure features perforated metal door for easy maintenance access and cooler operation. Entire electrical assembly (jbox and transformer enclosure) is removable from the housing for easy maintenance.
E.... Lamps
One (1) 12V MR11 lamp mounted in adjustable double gimbal. Lamp holder is removable and may be regressed 1” for additional
secured with threadless, bayonet action. Optional retractable arm is available for lamp pulldown and extreme aiming.
F.... Mounting
Mounting clips are provided which mount the housing edge flush with the finished ceiling line. Mounting clips are secured to the housing through the meshplate with screws.
G... Labels
cULus listed for
Ceiling
COMBOLIGHT®
Next Generation
Recessed
One (1) Light 12V MR11
Remodel Housing Trimless
Double
Gimbal
8.50” | 4.70” |
1.60”
6.25”
10.24”
3.39”
45º x 45º Adjust
5.75”
Required
above ceiling
10.24”
3.88”
Integral Low Voltage Transformers
Separate Wiring Compartment
6.50”
3.88”
Perforated Meshplate
NOTES:
18” flexible conduit
Thermal Protector
ORDERING INFORMATION
C1
R
N
N
|
|
|
|
|
|
|
|
| Configuration |
| Lamp Type / Wattage Label | ||||
| C1 = COMBOLIGHT |
| 020M11 = | 20 Watt max. MR11 12V | |||
| Recessed One (1) Light |
| 035M11 = | 35 Watt max. MR11 12V | |||
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| Housing |
| |||
|
|
| R = | Remodel |
| ||
|
|
|
|
|
|
|
|
Power Supply
Voltage
1 = 120V
2 = 277V
Power Supply
E = Electronic Low Voltage
Transformer
M = Magnetic Low Voltage
Transformer
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Trim Insert Finish
N = Trimless
Housing Interior/Electrical Door/Sleeve Finish
W = White
B = Black
S = Industrial Silver
Specifications and Dimensions subject to change without notice.
rev 121107
www.cooperlighting.com | RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • |
|