Cooper Lighting ADY071461 installation instructions Large, INDOOR SRR, Visor and Non-Visor

Semi-recessed fixtures shown without thermal protectors	Installation Instructions
	Sheet 1 of 5

	C-Scroll
Vault		Roundel

These installation instructions are valid with the above Ametrix styles.

Large, INDOOR

SRR

(Semi-Recessed, Remote ballast)

Visor and Non-Visor

Warning: Before starting any work ensure that all sources of power are turned off. All work must meet local/national codes and be performed by a certified electrician. Do not mount fixtures vertically.

Exploded view and part call-out

(ceiling grid)

Cover plate

Universal bracket (2x)

Thermal protector cover plate

#8-32 Hex nut (4x)

Exploded view and part call-out

(drywall)

#8-32 x3/8"

Drywall bracketPan head screw (4x)

Housing assembly

Fixture head

with mounting plate

1.Removing brackets from fixture housing

(ceiling grid)

Pem-stud

#8-32 Hex nut (4x)

Universal bracket (2x)

1.Remove universal brackets from fixture housing by removing all four #10-32 Hex nuts.

1.Removing fixture head from housing

(drywall)

#10-32 x5/8" Pan head screws

1.Loosen all #10-32 x5/8" Pan head screws in keyhole slots inside of fixture housing. (16 1/2" & 22 1/2" fixture sizes use four(4) screws, 30 1/2 fixture sizes use six(6) screws"

2.Slide fixture head assembly to side and remove from housing.

3.Store fixture in safe place.

ADY071461 REV A (ECN070344)