Cooper Lighting Architectural Area Luminaire Options + Accessories, Arm Mount, Tenon Adapter

15

16

OPTIONS + ACCESSORIES

ARM MOUNT

Standard 8" [TLM] or 10 1/2" [TLL] extruded aluminum arm features internal bolt guides for twin support rods. Round pole mounting accommodated by utilizing provided round pole adapter between the fixture arm and pole shaft.

[MS]

[Arm Mount]		[WM]
TENON ADAPTER	PHOTOCONTROL RECEPTACLE [R]
Tenon adapters available to slip fit over poles	Fixtures available with gasketed photocontrol
equipped with nominal 2" pipe size steel tenon	receptacle for mounting a standard NEMA
[2 3/8" O.D., 4" length] or nominal 3" pipe size	photocontrol [ordered separately]. Medium
steel tenons [3 1/2" O.D., 5" length]. Adapter	housing also available with a button-style
secures to tenon via six [6] stainless steel	photocontrol [P].
bolts. For complete configuration availability,	INTERNAL HOUSE-SIDE SHIELD [HS]
see Tenon Adapters on page 16.

EXTERNAL MAST ARM ADAPTER [MS] Cast aluminum mast arm adapter secures fixture head to nominal 2" [2 3/8" O.D. pipe size] horizontal steel tenon arm. Adapter casting slip fits over tenon arm and is secured via two [2] stainless steel bolts.

WALL MOUNT [WM]

Wall mount plate secured to wall via four [4] lag bolts [lag bolts supplied by other]. Wall mount kit includes 1/2" thick steel adapter plate, a 8" [TLM] or 10 1/2" [TLL] machined extruded aluminum arm and two [2] fixture support rods.

POLYCARBONATE VANDAL SHIELD [VS]

Internally mounted 3/16" thick molded polycarbonate lens, treated with UV inhibitor to discourage the gradual discoloration that results from exposure to sunlight and UV radiating sources.

QUARTZ RESTRIKE [Q + EM + EM/SC] Optional quartz restrike [Q] energizes auxiliary quartz lamp upon power reactivation and extinguishes once HID lamp re-ignites. Quartz restrike with time delay [EM] adds cold start activation. Emergency Separate Circuit [EM/SC] allows the quartz lamp socket to be wired to an independent relay controlled power source.

Internal house-side shield reduces light concentration behind the pole while maintaining street side efficiency. Internal house-side shields available on Type II, III, IV and AF distributions.

EXTERNAL HOUSE-SIDE SHIELD

[MA1213-XX + MA1214-XX] External house-side shield provides sharp cutoff behind the pole and shields the lamp from direct view. Mounted to the door frame via double-sided VHB adhesive [TLM] or three

[3]stainless steel fasteners [TLL]. Rotatable in 90° increments, the external house-side shield provides industry leading glare and spill light control.