Cooper Lighting MD620T4G65 specifications Mechanical Housing, Plaster Frame/Collar, Junction Box

DESCRIPTION

Recessed lens downlight with 6 inch aperture with vertical T4 GU6.5 ceramic metal halide lamp. Available in narrow, medium and wide distributions. Fixture is suitable for commercial construction. Insulation must be kept 3" from top and sides of housing. Two stage reflector system produces smooth distribution with excellent light control and low aperture brightness.

SPECIFICATION FEATURES

PORTFOLIO

Catalog #	Type
Project
Comments	Date
Prepared by

Mechanical Housing

Steel housing encloses optical system protecting reflectors from damage. Tool-less top access allows service from above. Access door allows splice inspection and ballast service through aperture.

Plaster Frame/Collar

Die cast aluminum 1-1/2" deep collar accommodates ceiling materials up to 2".

Universal Mounting Bracket

Accepts 1/2" EMT, C channel and bar hangers and adjusts 5" vertically from above the ceiling.

Junction Box

(6)1/2" and (2) 3/4" trade size pry outs positioned to allow straight conduit runs. Listed for (12) #12 AWG (six in, six out) 90°C conductors and feed thru branch wiring.

Fasteners

All fasteners that must be routinely loosened or tighten for installation and or maintenance are to be captive.

Re-lamp

Suitable for top or bottom lamp replacement. A lockout feature prevents the lamp socket from being installed in the incorrect beam distribution position during service.

Optical Upper Reflector

Clear anodized spun 0.050" thick aluminum produces narrow, medium and wide distribution based on selected lamp center position.

Lower Shielding Reflector

Hydro-formed 0.050" thick alumi- num parabolic contour provides 50° lens and lens image cutoff. Self flanged standard with optional white painted flange. Also avail- able with polymer flange. Available in all standard Alzak® finishes.

Shielding

0.125" thick diffuse glass lens masks arc tube support wire image, striations and color de- mixing common with uncoated ceramic arc sources. Lens is captive during lamp replacement.

Trim Retention

Upper and lower reflectors are held securely together and are retained with two torsion springs holding the flange tightly to the finished ceiling surface.

Electrical

Pulse rated GU6.5 ceramic lamp socket attaches to upper reflector with three-position bracket and precisely maintains lamp center.

Insulation Detector

Self resetting detector opens circuit if insulation is improperly installed.

10-3/16” [259mm]

5-11/16” [145mm]

7-1/4”

[185mm]

Ballast

Universal input 120/277V electronic ballast provides noise free opera- tion, improved efficiency and increase lamp life as compared with magnetic ballast. Regulated output power over a wide range of ANSI lamp voltages results in excellent color stability over time.

Quartz Lamp Re-strike Time Delay System (Q Option)

Internal auxiliary 100W DC bayonet base T4 quartz lamp (included) provides low level illumination in the event of a momentary power interruption.

Emergency Circuit Lamp (X Option)

Emergency circuit lamp module for 100W DC bayonet base T4 quartz lamp (included) by emergency circuit.

Code Compliance

Thermally protected and cULus listed for protected wet locations. Optional City of Chicago environ- mental air (CCEA) marking for plenum applications. EMI/RFI emissions per FCC 47CFR Part 18 non-consumer limits.

16-1/16” [408mm]

14-7/16” [367mm]

MD620T4G65

MD639T6G65

Ceramic Metal

Halide Lens

Downlight

6" Aperture

E N E R G Y D A T A

Lamp: 20W MH

Input Watts: 26W

Max Current: 120V- 0.22A, 277V-0.11A Power Factor:>95% T.H.D.:<15% Min Starting Temperature: 5°F (-15°C)

Lamp: 39W MH

Input Watts: 120V-46W, 277V-45W

Max Current: 120V 0.39A, 277V-0.18A

Power Factor:>95% T.H.D.:<15%

Min Starting Temperature: -20°F (-30°C)

ORDERING INFORMATION

SAMPLE #: MD639T4G65-EQ
Ho u s i ng	Lamp Type/Wattage Ballast Options	Trim	Finish	Options	Accessories

MD6 = 6” Aperture

MD6CP = 6” Aperture Chicago

Plenum

20T4G65 = 20W T4G6.5 CMH lamp 39T4G65 = 39W T4G6.5 CMH lamp

E 1 = Electronic, UNV 120/277V 50/60 Hz

1E = Electronic,

120V 50/60 Hz

2E = Electronic,

277V 50/60 Hz

3E 1 =Electronic,

347V 50/60 Hz

Q1 =Quartz Restrike

System

X= Emergency

Circuit Lamp

6950 = Reflector assembly with white polymer trim ring

6950X = Reflector assembly with white polymer trim ring, accepts quartz standby lamp

6951 = Reflector assembly,

self flanged

6951X = Reflector assembly, self flanged, accepts quartz standby lamp

Ll=Low Iridescent

Clear

H=Clear Haze

WMH=Warm Haze

G=Gold

WH=Wheat

GP=Graphite

GPH=Graphite Haze

K=Cognac

KH=Cognac Haze

B=Black

W=Gloss White

WF = White	HB26= L Channel Bar Hangers, 26” Long, Pair
painted	HB50= L Channel Bar Hangers, 50” Long, Pair
flange	RMB22= Wood Joist Bar Hangers, 22” Long, Pair
(self-	HSA6= Slope Adapter for 6” Aperture Housings;
flanged	Specify slope
only)	TRM6= Metal Trim Ring, White
	TRR6= Rimless Trim Ring, White
	FK= Field Installable fuse Kit; Specify Amperage

Notes: 1 Available with 39 watt only.

Specifications and Dimensions subject to change without notice.	ADP081246
Consult your representative for additional options and finishes.	07/15/2008 12:14:00 PM