Cooper Lighting MD6xT6, MD6xT4, MD6CPxT6, MD6CPxT4 installation instructions Portfolio

Portfolio®

To re-lamp from below the ceiling:

Step 1. Remove the lower trim by gently pulling the trim down until the torsion spring stops are reached. Remove the trim from the torsion spring receivers.

Step 2. Remove the socket assembly from the top of the trim using the two thumbscrews. Use gloves if the assembly is still warm. Gently remove the old lamp. Dispose the old lamp according to local recycling code.

Step 3. Install the new lamp. Make sure the new lamp does not have any fingerprints, dust or lint.

Step 4. Re-assemble the socket assembly back onto the trim. Be sure to re-assemble the lamp assembly in the same distribution as before (Narrow, Medium or Wide). Secure with the two thumbscrews.

Step 5. Install the trim back into the housing using the torsion springs.

To re-lamp from above the ceiling:

Step 1. Remove the top cover.

Step 2. Remove the socket assembly from the top of the trim using the two thumbscrews. Use gloves if the assembly is still warm. Gently remove the old lamp. Dispose the old lamp according to local recycling code.

Step 3. Install the new lamp. Make sure the new lamp does not have any fingerprints, dust or lint.

Step 4. Re-assemble the socket assembly back onto the trim. Be sure to re-assemble the lamp assembly in the same distribution as before (Narrow, Medium or Wide). Secure with the two thumbscrews.

Step 5. Install the trim back into the housing using the torsion springs.

704530 Rev. A - 5 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269