Reflectors
All Harmony VR Oval luminaires are provided with a white polyester powder coat reflector with 94% total reflectivity. 70W and higher HID lamps use highly specular aluminum material.
Housing
Precision .125" thick heavy-duty die-cast aluminum housing promotes durability and efficient heat dissipation through integral ballast heat sinks. Marine-grade low copper alloy aluminum resists corrosion. Back casting in 3 sizes to accommodate high wattage HID and CFL lamp capabilities.
Lens
One-piece injection molded polycarbonate, .125" thick or optional .250" thick borosilicate glass. In clear prismatic or opal (polycarbonate only), the lens is scientifically designed to obscure lamp image while maintaining efficiency. The state-of-the-art design consists of an internal prism designed to spread the light evenly, in combination with a texture prescription on the exterior of the polycarbonate lens. This new design concept substantially reduces glare. Attached with 4 recessed stainless-steel tamper resistant center pin reject TORX® fasteners.
Sockets/Ballasts
HID and incandescent sockets are porcelain medium base sockets with nickel-plated brass screw shell. HID ballasts are standard magnetic HPF, with a minimum starting temperature of -40°C (-40°F) for HPS and -30°C (-20°F) for MH. Electronic ballast with universal voltage 120-277V standard with T6 MH lamps and are optional for 50W and 70W MH ED17 lamps. Compact fluorescent sockets are polycarbonate and incorporate 26-watt GX24q3;
32-watt GX24q3; 42-watt GX 24q4;
57-watt GX24q5; or 70-watt GX24q6 base with a 2-pin reject that ensures proper lamping. Compact Fluorescent ballasts are electronic, universal voltage
120-277V less than 10% harmonic distortion, with minimum starting temperatures of 0°C (32°F) for 26, 32, 42W and -18°C (0°F) for 57 and 70W.
Decorative Faces
Border, Vertical Eyelid, Horizontal Eyelid, Short Band, Long Band and Four Quadrant faces consist of high-impact, injection molded,
.125"
minimum thickness, polycarbonate overlay attached to the lens with stainless steel fasteners. Polycarbonate lens and overlay
attach to housing with four recessed TORX® fasteners. Custom faces available-consult Cooper Lighting Representative.
Finish
Injection molded color is matte black standard or matte white painted. The VariColor option is available on all decorative faces. VariColor paint option allows perfect matching to official organizational color(color chip requested for correct match).
Die-cast Housing Finish
Polyester-powder coat paint is applied in a five-stage process at 2.0-mil thickness and baked to 400°F. The finish is TGIC, textured, thermoset, and polyester powder coat. Finish is 500-hour-salt-spray test rated and has an impact rating of 160 inch-pounds.
Gasket
Extruded silicone O ring gasket provided on die-cast components to provide additional sealing against entry of water and bugs. On Borosilicate Glass lens a one-pieced molded silicone gasket is mechanically fastened to lens assembly to provide consistent seal between lens and housing. Die-cut sponge gasket provided for seal against wall and connector box. Fully gasketed assembly is IP66 rated for maximum protection from dirt and water.
Lamps
All metal halide fixtures with polycarbonate lenses will be shipped with UV-Guard lamps-standard. All other units supplied less lamp unless specified with "L" option.
Labels
Oval
SERIES HARMONY VR 15"
50W - 100W
High Pressure Sodium
Metal Halide
ADA COMPLIANT
42W MAX
40W - 75W
Incandescent
26W - 70W
Compact Fluorescent
