Cornelius 318569000, 560003870, 318949000, 569000261, 560003869 Dispenser Hood, Wiring Diagram

HOOD

TEMPLATE	KEY-LOCK SWITCH
(ITEM 2)
	(ITEM 5)
	LOCK KEY	HEX NUT
1.50	(ITEM 3)	(ITEM 4)

FIGURE 1. DISPENSER HOOD

6.Install KEY-LOCK SWITCH (item 5) in the hood as shown in Figure 1 and secure with HEX NUT (item 4).

7.Refering to Wiring Diagram (Figure 2) disconnect black electrical wire, with push-on terminal on it’s end, from terminal on the transformer outlet.

8.Connect black electrical wire, disconnected from the transformer outlet terminal, to mating electrical wire terminal on the WIRING HARNESS (item 1).

9.Connect other electrical wire of the wiring harness to output terminal on the transformer where the black electrical wire was disconnected from in step 7 preceding.

10.Connect other two wiring harness terminals to two terminals on the Key-Lock Switch.

11.Install hood on the Dispenser.

12.Connect electrical power to the Dispenser, then check Dispenser for proper operation.

13.Insert LOCK KEY (item 3) in key-lock switch, then check Dispenser for proper operation.

MATING

TERMINALS

BLACK

WHITE

KEY-LOCK SWITCH (ITEM 5 )

FIGURE 2. WIRING DIAGRAM

569000261 2