IMI CORNELIUS INC g One Cornelius Place g Anoka, MN
Telephone (800) | Facsimile (612) |
ED150 “K” STYLE LID KITS,
P/N 629083204 AND 629083202
These “K”style kits apply to the following ice maker:
|
|
| Ice Maker | Width |
|
|
| Manitowoc Q320/420 | 22I |
| |
|
|
| Table 1. |
| |
|
|
|
|
|
|
Item |
|
|
|
|
|
No. | Part No. |
|
| Name | Qty. |
1 | 52994 |
| Cover, Gray (629083202) |
| 1 |
| 52934 |
| Cover, Black (629083204) |
|
|
|
|
|
|
|
|
2 | 620027505 |
| DF150 Ice Maker Lid Assembly |
| 1 |
|
|
|
|
|
|
3 | 620027306 |
| Bracket |
| 2 |
|
|
|
|
|
|
4 | 70217 |
| #8 Screw |
| 6 |
|
|
|
|
|
|
5 | 50904 |
| RTV |
| 1 |
|
|
|
|
|
|
6 | 90221 |
| Label |
| 1 |
|
|
|
|
|
|
7 | 620909401 |
| Installation Instruction |
| 1 |
|
|
|
|
|
|
8 | 620701902 |
| Acorn Nut, |
| 2 |
|
|
|
|
|
|
9 | 620701901 |
| Sealing Washer |
| 2 |
|
|
|
|
|
|
10 | 620037007 |
| Baffle, Ice DF/ED150 |
| 1 |
|
|
|
|
|
|
11 | 621701903 |
| #8 Nylon Washer |
| 2 |
|
|
|
|
|
|
1.Unpack kit.
2.Insert a baffle assembly into the adapter lid.
3.Place (2) sealing washers (item 9) over studs and (2) flat washers (item11), then fasten in place with (2) plastic acorn nuts (item 8).
4.Set ice maker lid on the top of the dispenser.
5.Using the slotted holes in the lid as a template, drill four (4) 9/64Idiameter holes at the bottom of the slots (see detail A). Use extreme care not to drill into the hopper. Fasten the lid to the dispenser with four (4) #8 sheet metal screws, two on each side.
6.Seal the ice maker to the top of the dispenser as follows:
A.Run beads of RTV around the opening in the lid and inside of the perimeter of the ice maker outline so that the ice maker will set on the RTV.
| 620909401 |
1 | Revised: September 8, 1998 |
| March 1998 |
Rev B