11.If installing kit on a four-flavor Dispenser, install PLUG (item 5) in 1/2-inch hole in top of agitator motor plate.
12.Fill area between insulated refrigeration line and cutout area in front cover plate with PERMAGUM SEAL- ER (item 6). Also, overlap front cover plate and insulated refrigeration line with permagum sealer to prevent water leak.
13.If new Dispenser installation, refer to manual provided with Dispenser and complete installation as instructed.
14.Install Dispenser top cover and secure with four screws.
15.If Dispenser was in operation before start of Kit installation, place power switch in ‘‘ON’’ position.
3 | 185211001 |
