Cortelco 2194**V0E27S instruction manual Using Your Telephone, Maintenance Information

BEFORE USING YOUR TELEPHONE

1. Set the ringer volume control. If the control is set to OFF, you will not hear the ringer when someone calls you.

2. Your telephone has a TONE-PULSE switch. Set the switch to match the dialing service from the tele phone company.

• If you have pulse service, set the Tone-Pulse switch to PULSE.

• If you set the switch for TONE service, you must have TONE service or you cannot dial.

• If you set the switch for PULSE service and you haveTONE service, you can dial numbers, but you cannot use distant services, such as bank-by- phone, unless you press the TONE button.

USING YOUR TELEPHONE

TO PUT A CALL ON LOCAL HOLD

While on a call, press the HOLD button, the LED lights and the call is on local hold. Place the handset on hook, the HOLD indicator remains on while the call is on local hold.

To return to the call on hold:

Lift the handset or if the handset is off-hook, press the HOLD button, the LED will go off and the call is no longer on hold.

TO STORE NUMBERS:

Lift the handset, you will receive dial tone. Press the STORE button and dial the number (15 digits maximum). If desired press the PAUSE button to insert a two-second pause in the number sequence. Then press the STORE button again and press desired memory location button and place the handset on-hook, or press the STORE button to continue storing numbers. Use the shift button to store in two-touch memory locations.

TO DIAL STORED NUMBER:

To dial the stored numbers in the 10 one-touch memory locations:

1. Lift the handset.

2. Press memory location button

MAINTENANCE INFORMATION

Treat your telephone with care for trouble-free performance. Avoid dropping the handset. Carefully place the handset on-hook after use.

Clean your telephone with a damp cloth. Stains may be removed with a mild soap. Do not use liquid or aerosol detergents or cleaning agents.

5