![](/images/new-backgrounds/1308920/30892013x1.webp)
FEATURES OF YOUR TELEPHONE
TONE/PULSE SWITCH The TONE/PULSE switch, located on the side of your telephone, is used to set the type of dialing for your telephone to match the local service from your telephone company. The ‘P’ position is for Pulse dialing service. The ‘T’ position is for Tone dialing.
RINGER VOLUME CONTROL The
HANDSET VOLUME CONTROL The
STORE BUTTON The STORE Button is used to store numbers in memory locations for automatic dialing. You can store a maximum of 10
REDIAL BUTTON Your Patriot II telephone stores in memory the last nubmer dialed (31 digits maixmum). You can redial the last nubmer dialed by lifting the handset and pressing the RD/P button. This button must be the first button pressed after lifting the handset to activate the redial feature. You can erase the number stored in redial memory by lifting the handset and dialing any digit.
PAUSE BUTTON The PAUSE button can be used to program pauses in your memory locations.
FLASH BUTTON The FLASH button sends an interrrupt signal to the distant office. The interrupt is a
HOLD BUTTON To place a call on local hold, press this button and return the handset to tht ecreadle (the hold LED will light). To retrieve the call lift the handset or, if the handset if
DIP SWITCH The DIP switch located on the bottom of the phone priveds for:
a)Flash timing selection of 300 or 600 msec
b)Positive line disconnect option selection.
c)Pause time selection for 2 or 3.6 seconds.
d)
7