HOLDBUTTON
1. To place a call on hold, press the HOLD button and hang up the handset. The HOLD Indicator will light up and remain lighted until you resume your conversation.
2. To resume your conversation, lift the handset or that of any extension phone on the same line. The HOLD indicator will go off and your call can continue.
FLASHBUTTON
This telephone provides a line break signal for accessing PABX service or for conve- nient use of Call Waiting from your local telephone company. If you have Call Waiting service, you can alternate the Call Waiting function per the following instructions.
1.While having a conversation, another party calls and you hear a tone.
2.Press the FLASH button once and release. The first conversation is placed on hold and the second call can be answered.
3.Press FLASH button again and release. The first caller can be spoken to again and the second call is placed on hold.
Flash can also be used when storing numbers in memory locations to transfer a call to a new extension.
FLASH SWITCH
The Flash button sends a line interrupt signal to the distant office. The duration of the interrupt signal can be altered using the FLASH SWITCH for flash settings of 100 milliseconds, 300 milliseconds or 600 milliseconds.
DATAPORT
This is a connection which is in parallel with the telephone line. It allows the connection of a device such as a modem, caller ID, or an answering machine.
STOREBUTTON
To Store A Number In Memory:
1. Lift the handset and press the STORE button.
2. Dial the telephone number (15 digits maximum) to store in memory. Note: The memory locations can be chained together to store numbers of longer length.
3. Press STORE again.
4. To store in an auto memory location - Press one of the memory buttons (located on top of base).
5. Use pull out memory index to write in name and the memory button where it is stored.
8
