Plantronics DJM-3000 Bpm Counting, Using the Auto Mode to Count BPM, Press CH-1 H.P CUE switch

BPM COUNTING

Using the Auto Mode to Count BPM

This mode counts and displays the BPM of the channel selected with the H.P CUE switch and (when Effect selector switch is set to AUTO BPM, the CH-1 to CH-4 H.P CUE switch becomes the AUTO BPM COUNTER’s channel select switch) the channel selected with the Effect CH. SELECT switch, thus making it easy to synchronize two tracks with different speeds (count range 70.0-180.0 BPM).

Example: Display of BPM for CH-1 selected with H.P CUE switch and CH-2(2) selected with Effect CH. SELECT switch:

BPM display Effect selector switch

Effect CH.

SELECT switch

Effect

PARAMETER 1

control (TIME)

CH-1 H.P CUE switch	Effect parameter/	TAP switch
	BPM display

1Set the Effect selector switch to AUTO BPM.

2Press the BPM counter range selector switch to choose the desired BPM count range.

÷Select from one of the three ranges: 70-139, 91-180, or 70-180. The 70-180 range is selected with both LEDs (70-139 BPM and 91-180 BPM) light.

3Set the Effect CH. SELECT switch to 2.

÷The Effect parameter/BPM display LED “2” will light.

÷The BPM of the music input to CH-2 will appear on the

Effect parameter/BPM display’s counter.

*If the BPM cannot be counted for 2 seconds or more, the counter will flash.

*Some tracks cannot be counted in AUTO BPM mode. In this event, set to manual mode to count the BPM (see page 19).

4Press CH-1 H.P CUE switch.

÷The BPM display LED “1” will light.

÷The BPM of the music input to CH-1 will appear on the

AUTO BPM COUNTER.

*To measure BPM accurately, select only one channel (CH-1 to CH-4 H.P CUE switch) for the AUTO BPM COUNTER.

÷Display when the BPM of CH-1 and CH-2 (126) match.

BPM display

	LED
	Counter
	BPM counter range
	selector switch
Effect parameter/
BPM display	LED
	Counter

18

<DRB1314>