Plantronics DJM-3000 Selecting the Effect Mix Function, Using The Effect Mix Function

USING THE EFFECT MIX FUNCTION

Selecting the Effect Mix Function

Use the EFFECT MIX selector switch to select the desired operation mode.

OFF: Normal mode

¶No Effect Mix operation.

¶All three Effect select/start switches (ECHO, ZIP, ROLL) will remain unlighted.

¶The cross fader left-right Fader displays A and B will both be unlighted.

FADER: Effect Mix Fader Mode

¶The Cross fader lever can be used to manipulate effects, and to perform cue start/back cue.

¶Of the three Effect select/start switches (ECHO, ZIP, ROLL), the selected one will flash (default setting is ECHO), and the others will light steadily.

¶The cross fader left-right Fader displays A and B will light as follows:

Condition	Fader Display A	Fader Display B
When Cross fader lever is at A side	LIGHTS	OFF
When Cross fader lever is at B side	OFF	LIGHTS
When mode is entered with Cross fader lever at midway point	LIGHTS	LIGHTS
When Cross fader lever is moved from A side to midway point	FLASHES	OFF
after mode is entered.
When Cross fader lever is moved from B side to midway point	OFF	FLASHES
after mode is entered.

AUTO: Effect Mix Auto Mode

¶The three Effect select/start switches (ECHO, ZIP, ROLL) can be used to manipulate effects and to perform cue start/back cue (Cross fader lever does not operate).

¶Of the three Effect select/start switches (ECHO, ZIP, ROLL), the selected one will flash, and the others will light steadily.

¶The cross fader left-right Fader displays A and B will light as follows:

Condition	Fader Display A	Fader Display B
When mode is entered with Cross fader lever at A side	LIGHTS	OFF
When mode is entered with Cross fader lever at B side	OFF	LIGHTS
When mode is entered with Cross fader lever at midway point	LIGHTS	LIGHTS
When sound from A side is output	LIGHTS	OFF
When effects are applied to A side	FLASHES	OFF
When sound from B side is output	OFF	LIGHTS
When effects are applied to B side	OFF	FLASHES

The effect mix mode does not operate when Assign A and Assign B are set to the same channel.

(In this case, fader display A, fader display B, and the fader start display for the selected channel will all flash).

FADER START switches

EFFECT MIX selector switch

Fader display A		Fader display B
CROSS FADER ASSIGN	Cross fader lever	CROSS FADER ASSIGN	Effect select/
		B switch	start switches
A switch

23

<DRB1314>