PART NAMES AND FUNCTIONS
«
∞ |
|
§ | ⁄ |
¶ |
|
•
¤
ª
º
‹
– |
|
≠ | › |
| |
Ÿ | fi |
Å
fl ‡ ° ·
«BEAT EFFECTS Controls
∞
Displays the channel selected for BPM count.
§ AUTO BPM COUNTER
When AUTO BPM is selected with the Effect selector switch (⁄), displays the BPM of the channel
4)selected with the H.P CUE switch (=). The indicator
flashes during counting, or if it is unable to count BPM.
¶BPM counter range selector switch
¶ BPM can be selected in one of the ranges
180,
•BPM counter range displays
¶Displays the BPM count range selected. When BPM count range
¶If both indicators are out, it indicates manual mode. For more information about manual mode, see the item
“BPM COUNTING” “on pages
If the Effect selector switch (⁄) is set to DELAY, ECHO, PAN, TRANS, FILTER or FLANGER, the indicator will display the BPM of the source selected with the Effect CH. SELECT switch (¤).
ª1-4, MIC, MASTER (Source displays)
Displays the source selected with the Effect CH. SELECT switch (¤).
¶If the Effect CH. SELECT switch is used to select “CF.A” or “CF.B”, the channel that lights will be the
one
ºPARAMETER 1 (Parameter 1 / BPM counter)
The display contents change in accordance with the setting of the Effect selector switch (⁄).
¶When AUTO BPM is selected, the display shows the BPM of the source selected with the Effect CH. SELECT switch (¤). The indicator flashes during BPM counting, or when it is unable to count BPM.
¶When SND/RTN is selected, nothing is displayed.
¶When a setting other than AUTO BPM or SND/RTN is selected, the display shows the value of the effect set with Effect PARAMETER 1 control (‹).
–BEAT (Effect synchronous displays / Beat displays) This display’s contents differ depending on the setting of the Effect selector switch (⁄).
¶When DELAY, ECHO, PAN, or TRANS are selected, the display shows the equivalent parameter 1 value for the BPM of the selected source. The display lights when the beat is in the range 1/2 to 4/1. If the beat value is below 1/2, pressing the Effect beat selector switch (@) causes the value to become 1/4, and all display indicators go out. If the beat value is above 4/1, pressing the Effect beat selector switch (#) causes the value to become 8/1, and all display indicators go out.
If the value does not match the number of beats, the indicator for the nearest beat value will flash.
¶When FILTER or FLANGER are selected, the display shows the equivalent parameter 1 value for the BPM of the selected source. The display lights when the beat is in the range 1 to 16. If the beat value is below 1, pressing the Effect beat selector switch (@) causes the value to become 1/2, and all display indicators go out. If the value is above 16, pressing the Effect beat selector switch (#) causes the value to become 32, and all display indicators go out.
If the value does not match the number of beats, the indicator for the nearest beat value will flash.
¶When REVERB is selected, the display shows the amount of reverberation applied.
¶When PITCH is selected, the display shows the amount of pitch modification applied.
¶No display appears when AUTO BPM or SND/RTN are selected.
10
