Run the required cable length to your
Ultimate 106. Attach the cable firmly to the wall.
Thread the plastic wire grip through the socket
(as shown above).
The telephone extension cable contains 4
strands of wire, 2 with broad orange, or blue
stripes, 2 with narrow orange or blue stripes.
Choose a pair of wires of the same colour, for
instance the broad blue stripes and the narrow
blue strips.
Then, holding the insertion tool, as shown,
simply push the wires firmly into connection 2
and 5. The broad blue stripes into connector 2,
the narrow blue stripes to connector 5. Secure
the cable with the cable grip.
6
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
To connect up to 6 masterextension sockets
In your Wiring Kit you will find the white
socket(s) and a disposable insertion tool.
You will need to decide how you wish to fix the
extension socket and how the cable will be run
into it.
Push out the plastic ‘holes’ in the backbox that
correspond with where you wish the cables to run.
Screw the backbox of your extension socket
onto the skirting board or wall using the screws
provided.
Now strip off approximately 5 cms (about 2 ins)
of outer sheath from the extension cable. The
colour-coded covering on the wires in the cable
should not be stripped.
IMPORTANT
You must connect your extensions to a
MASTER telephone socket. You can
purchase master sockets and wiring kits
from any good electrical retailer.
●
1Install the required number of

extension sockets

Connector 1
Connector 2
Connector 3
Connector 6
Connector 5
Connector 4