Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129

To use the BT Ringback service

With the BT Ringback service, when an engaged telephone becomes free again, you are called back.

This is a BT Network Service and is chargeable. Please contact BT for more details.

When you hear the engaged signal:

5Press 5.

Replace the receiver. When the network rings back, all extensions will ring. When you lift the handset, the call is connected.

PLEASE NOTE

If you have set Answer Machine, the Ringback will continue to ring all extensions. It will not be answered by the Answer Machine.

To cancel a BT network Ringback

9Enter this code from any extension.

#37#

Using the speed dial memory

Up to 50 names and numbers may be stored in the system.

To store a name and number

6Enter this code.

The voice announces “Record name”.

Speak the name to go with the number into the handset.

After 3 seconds the voice announces

“Enter 2 digit location and number”

(to shorten the length of the recorded RECALL name, press RECALL while recording).

01-50Enter the 2-digit memory location under which you want to store the number. (Select from 01 to 50).

KEYPAD Enter the telephone number you want. (It is not necessary to insert 9 for an outside line when storing Speed Dial numbers.)

Hang up your extension.

A maximum of 30 digits can be stored. If 30 digits are entered, you will hear a beep and the number is stored. Hang up to finish.

Location 50 is reserved for a hotline extension number.

Location 49 is reserved for the door

intercom “Ring a telephone number”

mode. This will enable visitors to be directed to another number (stored in location 49) when pressing the door intercom button.

29

Page 31
Image 31
BT 106 manual Using the speed dial memory, Enter 2 digit location and number, Intercom Ring a telephone number