DJ MIXER
DJM-3000
Operating Instructions
DRB1314
IMPORTANT NOTICE
CHECKING ACCESSORIES
FEATURES
CONTENTS
USING THE EFFECT FUNCTIONS
Cleaning the Unit
Installing the DJM-3000 in an EIA rack
CAUTIONS REGARDING HANDLING
Location
CONNECTIONS
Connecting audio cords
1. Connection of Input Equipment
DJM-3000
CONNECTIONS
2. Connection of Outputs, Microphones, etc
6 MASTER LEVEL ATT
8 REC OUT
7 Input selector switches
6 MIC switch
PART NAMES AND FUNCTIONS
¥ MIC Microphone Controls
“ POWER Switch HEADPHONES Controls
BOOTH MONITOR Control
\ FADER START Switches CH-1, CH-2, CH-3, CH-4
= H.P CUE Headphones cue switch
PART NAMES AND FUNCTIONS
« BEAT EFFECTS Controls
Ÿ H.P CUE Headphones cue switch
≠ Effect beat selector switches @, #
⁄ Effect selector switch
¤ CH. SELECT Effect channel selector switch
Features of Various Effectors
USING THE EFFECT FUNCTIONS
1. DELAY one sound repeated
AUTO BPM COUNTER
6. FLANGER
5. FILTER
7. REVERB
8. PITCH Pitch Shifter
DELAY
Delay, Echo, Auto Pan, Auto Trans, Filter, and Flanger Operations
Items Set for Each Effect
ECHO
2 Set the Effect CH. SELECT switch to
1 Set the Effect selector switch to DELAY
4 Turn on the Effect ON/OFF switch
Precautions
1 Set the Effect selector switch to PITCH
Effector Settings
Setting the Balance Between Original and Pitch
Setting Pitch
4 Turn the Effect ON/OFF switch on
Using an External Effector
1 Set the Effect selector switch to SND/RTN
4 Adjust the return level
1 Set the Effect selector switch to AUTO BPM
Using the Auto Mode to Count BPM
3 Set the Effect CH. SELECT switch to
4 Press CH-1 H.P CUE switch
BPM COUNTING
Using the Manual Mode to Count BPM
Effect parameter/ displays BPM display
BPM display
Fader Start Play To Use Fade-in Operation with a Connected CD Player
USING THE FADER START FUNCTION
Cross Fader Start Play and Back Cue Play
CMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500
Starting with the Channel Fader
Precaution
Starting with the Cross Fader
2 Push the Channel fader lever all the way to the bottom
Effect Mix Features
USING THE EFFECT MIX FUNCTION
Example When set for 4-beats
Example When set for 4 beats
USING THE EFFECT MIX FUNCTION
Selecting the Effect Mix Function
4 Set EFFECT MIX selector switch to FADER
2 Set the CROSS FADER CURVE selector switch to
Effect Mix Fader Mode
3 Set the Cross fader lever to the Effect Mix starting position
Effect Mix Auto Mode
3 Set the EFFECT MIX selector switch to AUTO
USING THE EFFECT MIX FUNCTION
Problem
TROUBLESHOOTING
Possible Cause
Countermeasure
Accessories
SPECIFICATIONS
Audio Section
Electrical Section, etc
Pioneer Electronics of Canada, Inc
800 - 872
PIONEER ELECTRONICS USA, INC CUSTOMER SUPPORT DIVISION
P.O. BOX 1760, LONG BEACH CA 90801-1760, U.S.A