FEATURES

Effect Mixing

Changing between three kinds of effect mix (ECHO, ZIP, ROLL) can be performed easily merely by operating the Cross fader lever, or by pressing the Effect select/start switch.

BPM Counter

The auto BPM counter provided makes music tempo visible to the eye.

Peak Level Meter

The peak level meter provided is equipped with 11-bit LED indicators for all channels.

Fader Start/Stop

The CD player can be started or stopped simply by increasing or decreasing the level of the cross fader or channel fader. (This function can only be used when the Pioneer CD player series CMX-3000, CMX-5000, CDJ-1000, CDJ-100S, CDJ- 700S or CDJ-500 II is connected.)

3-Band Equalizer and Kill

This 3-band equalizer corresponds to the HI, MID, and LOW channels. The attenuation level also serves as a kill function, which can decrease the level to –26 dB.

Variety of Effects

Both internal and external effects can be applied to all channels, the microphone, and master.

A variety of effects can be enjoyed, including delay, echo, auto pan, auto trans, filter, flanger, reverb and pitch shifter.

Full range of input and output functions

This DJ Mixer is equipped with 4 (+3*) LINE inputs, 4 PHONO (dedicated MM) inputs, and 2 (+1*) MIC inputs, for a total of 10 inputs. In addition to 2 master output lines (one supporting professional-grade XLR mode), a variety of other independent outputs are also provided, including booth monitor output, recording output, and two digital outputs. SEND/RETURN jacks are also provided for the connection of external effects units.

*These additional connectors can optionally be switched from PHONO input to make up the total.

CHECKING ACCESSORIES

÷2 short-circuit pin plugs

These are inserted in the PHONO 4 terminals.

÷Operating instructions

÷Warranty

4

CONTENTS

 

FEATURES

4

CHECKING ACCESSORIES

4

CAUTIONS REGARDING HANDLING

5

Location

5

Installing the DJM-3000 in an EIA rack

5

Condensation

5

Cleaning the Unit

5

CONNECTIONS

6

PART NAMES AND FUNCTIONS

8

USING THE EFFECT FUNCTIONS

12

Features of Various Effectors

12

Delay, Echo, Auto Pan, Auto Trans, Filter,

 

and Flanger Operations

14

Operating Reverb and Pitch Shifter

16

Using an External Effector

17

BPM COUNTING

18

Using the Auto Mode to Count BPM

18

Using the Manual Mode to Count BPM

19

USING THE FADER START FUNCTION

20

Starting with the Channel Fader

21

Starting with the Cross Fader

21

USING THE EFFECT MIX FUNCTION

22

Effect Mix Features

22

Selecting the Effect Mix Function

23

Effect Mix Fader Mode

24

Effect Mix Auto Mode

25

TROUBLESHOOTING

26

SPECIFICATIONS

27

<DRB1314>

Page 4
Image 4
Plantronics DJM-3000 operating instructions Features, Checking Accessories, Contents