Countax D18, D50 Notes:

Notes:

Page 23

Contents

Page MANDATORY SAFETY INSTRUCTIONS FOR THE OPERATION OF GARDEN TRACTORS SUPPLEMENTARY INSTRUCTIONS FOR THE USE OF COUNTAX D18/50 TRACTOR SAFETY SWITCHES IGNITION WARNING LIGHTS (fig 2) CUTTER ON/OFF SWITCH ENGINE SPEED CONTROL HEADLIGHT SWITCH Controls POWER TAKE-OFF(PTO) fig ELECTRIC LIFTS PGC NET EMPTY SWITCH (fig 3) SEAT ADJUSTMENT MULCH MOWING REAR DISCHARGE DECK Removal REMOVAL OF CUTTER DECK TO CLEAN CUTTER DECK ENGINE TO CUTTER DRIVE BELT REPLACEMENT Check List CUTTER FAILS TO START OR CUTS OUT WHEN SWITCHED ON UNEVEN CUT (CUTS SHORTER ONE SIDE THAN THE OTHER) Deck Levels - Front to Back LEVELLING FRONT TO BACK T ools Required Cutter - Levelling Side to Side Cutter LEVELLING SIDE TO SIDE REAR ADJUSTMENT FRONT ADJUSTMENT 1/2” Spanner Cutter - Drive Belt ENGINE TO CUTTER DRIVE BELT TENSION CONNECTION REMOVE THE NET INSTALLING THE DRIVE BELT PTO DRIVE BELT TENSION LOWER THE COLLECTOR Adjustments ADJUST THE SWEEPING HEIGHT CHECK LIST TO TIP CUTTINGS Drive Belts REPLACING AND TENSIONING PTO DRIVE BELT CONNECTION CORRECT BELT TENSION CHECKING, TENSIONING AND REPLACING Brush TO REMOVE THE BRUSH STOCK REMOVAL OF FRONT WHEEL REMOVAL OF REAR WHEEL FUSES AND SHORTS PRINTED CIRCUIT BOARD ELECTROMAGNETIC BLADE CLUTCH Engine - Oil and Oil Filter Engine LUBRICATION OIL INSPECTION AND REFILL OIL CHANGE (fig 2) ENGINE OIL FILTER REPLACEMENT(fig 3) Cooling COOLANT LEVEL COOLING WATER REPLACEMENT FUEL FILTER AIR BLEEDING FROM FUEL SYSTEM AIR CLEANER ELEMENT CLEANING AND BONNET AIR VENTS RADIATOR GRILL Oil TUFF TORQ K71 AXLE TRANSMISSION OIL LEVEL Notes: Recommended Tyre Pressure: Front Wheels: Rear Wheels: Weight: