Cutting Decks

MULCH MOWING

Mulching can save time, avoids gathering piles of rotting cuttings and feeds your lawn. It is however necessary to observe certain rules to mulch mow successfully:

Reduce the height in each pass. If the grass has grown long make several passes to achieve the cut height you require.

Always cut with the throttle set to FAST – mulching needs the full running speed of the engine.

Mow often, particularly in spring and early summer. Short clippings of 25mm (1") or less decompose more quickly.

If possible avoid cutting in the wet.

If an unsightly residue of cuttings is being left – increase the cutting height.

Vary the mowing pattern from cut to cut.

Always keep the underside of the cutting deck clean to ensure good grass flow.

Always check that the blades are sharp and in good condition

– but do not attempt to sharpen or replace them yourself. New Countax blades are not expensive and it is good practice to ask your dealer to change them regularly.

REAR DISCHARGE DECK

The Countax IBS Rear Discharge deck in contrast to the Mulch Deck, finely cuts the grass and then ejects it rearwards where it is collected by the Powered Grass Collector. This system offers the benefit of the ‘striped lawn’ finish to your garden and tidies loose leaves and garden debris from your lawn.

 

Specified Belts and Blades

 

 

Part:

Part No.

 

 

Engine/Deck Belt -

22871200

 

 

Dayco Super II B56 (Mulcher)

 

 

 

 

 

Engine/Deck Belt -

22940100

 

 

Dayco Super II B57 (IBS)

 

 

 

 

 

Deck Internal Drive (Mulcher)

228000900

 

 

BB112

 

 

 

 

 

 

 

 

 

Deck Internal Drive (IBS)

22950200

 

 

BB155

 

 

 

 

 

 

 

 

 

Mulcher Blades x3

16938100

 

 

 

 

 

 

IBS RH Blade

169381300

 

 

 

 

 

 

IBS LH Blade

169381400

 

 

 

 

 

 

PGC Drive Belt A47

22898000

 

 

 

 

 

 

PTO Drive Belt - Dayco II A98

22950100

 

 

 

 

 

 

Transmission Drive Belts A98

2295000

 

 

Dayco Super II

 

 

 

 

 

 

 

 

Remember - only use specified Belts and Blades. Never accept a substitute!

fig 1

fig 2

fig 3

fig 4

Mulch Deck

Pulley Arrangement

Mulch Deck

Blade

Arrangement

Mulching

Process

IBS Deck

Pulley

Arrangement

Page 7