17
18
HOW TO USE
How to adjust the pollution sensitivity
※The unit is set at a standard sensitivity. In case that pollution degree is maintained at the highest or the lowest level for over 2 hours after the unit starts to work, please adjust the sensitivity of sensor as the following the way below.
Step1 Push both the ‘Auto/Manual’ and ‘Air Flow’ just over 2 seconds.
Step2 The “Pollution” light is out, and the light stick of indication is on as in the drawing.
Step3 You can adjust the sensitivity by pushing ‘Auto/Manual’ button.
stage1:sensible
stage2,3:standard
stage4:insensible
�
Step4 You can confirm the sensitivity, which you did, by pushing the ‘Air Flow’ button.
