WARNING
Unplug power plug before cleaning.
Install the RBD Plasma filter and the Antibacterial Catalysis filter in the unit after complete dry.
RBD Plasma Antibacterial Catalysis Filter
●Please open the filter cover by pulling the right side of the cover.
●Please take out the plasma antibacterial catalysis filter, and then divide the filter into two pieces by pushing both hooks of the filter.
� 
●When you clean the RBD plasma filter, please wipe the tungsten wire, the dirties on the electrode with a wet cloth and then make it dry with a dry cloth.
※Never splash the water in the unit or
soak it in water.
※Be careful about the down of the tungsten wire.
※ Please completely dry, in case that the water gets into the inside of the filter. (If the inside is taken by water, please use after dry over 12 hours.)
Safety Information Operating Instructions Troubleshooting Tips Customer Service
