Direction for use
Direction for use
Fill with water before plugging the power cord. (No water may cause nebulizer malfunction.)
Coins, nails and screws in the reservoir result in the malfunction of the nebulizer part. Please check before starting. In addition, disconnect the water tank, drain the water in the reservoir thoroughly and check if the
After initially filling with the water, the humidification starts after approx. 20seconds~4minutes.
Wash the water tank before initial use to spray more comfortable mist.
Filling the water tank through the top water pouring.
Turn the water tank lid
Fill the water by using containers such as kettles.
Use clean tap water.
Do not use coldwater under 42.8 (6 | or |
warm water over 95 35 . |
|
Doing so may cause nebulizer malfunction.
The use of undergrounse poor water spray or appliance failure.
Fill water to more than half the water tank but less than the MAX level.
If water is lower than half the water tank, humidification may be delayed.
If water is supplied up to the MAX level, the water will overflow.
Do not splash water around the water tank while supplying water.
After topping up the water, dry the water tank with a clean cloth.