Coway MHS-E5010X manual Maintenance, Cleaning the iodine filter, Cleaning the water tank

Models: MHS-E5010X

1 50
Download 50 pages 49.46 Kb
Page 21
Image 21

Maintenance

Unplug the power cord before cleaning.

After using sterilized humidification, the temperature of the water in the reservoir is hot. Thus, after the water gets cold, clean the appliance.

Clean the 2-way mist outlet, the reservoir and the water tank once every two days.

Cleaning the iodine filter

-After disconnecting the filter from the Ez water tank cap, shake it slowly in clean tap water

to wash it.

The filter must not be disassembled. Doing so may damage the ion exchange resin protection pack and leak the resin.

Iodine filter may break with strong impact.

The lifetime of the iodine filter is 3 months.If an expired appliance is used, the appliance performance may be degraded.Thus, replace the filter.

If 3 months have passed, replace the filter and use a new one.

While the filter is used, yellow liquid may leak from the ion exchange resinoccasionally. It is not harmful to health.

Cleaning the water tank

- Put tap water in the water tank, wipe it with a soft cloth and shake the water tank to remove water scale.

Do not use general detergent or soapy water. Doing so may cause nebulizer damage or bodily injury as they are sprayed along with water particles.

Cleaning the main body

Drain the water in reservoir.

Drain the water in drain direction.

Ensure that water does not enter the vent.

After removing Silver Nano Anti-Bacterial Tray for cleaning from the main body, wash it out with clean water and remove water scale with a soft cloth.

A small quantity of water may remain in the main body. Remove the remaining moisture with a soft cloth and attach the nano-silver antibacterial tray.

Do not disassemble the water level sensor. Doing so may cause appliance failure.

Page 21
Image 21
Coway MHS-E5010X manual Maintenance, Cleaning the iodine filter, Cleaning the water tank