20Product Usage
HDD Power Management
●Enable/Disable HDD power savings mode.
●If set to ‘Enabled’, playback time would be extended, but system response may slow down.
Charge During operation
●Enable/Disable Charging via AC adapter while in use.
●If set to ‘Disabled’, AC adapter will only be used as an external power source, and will
not charge COWON Q5W.
Information
●Boot loader version: Displays current booting loader version installed
●Firmware version: Displays current firmware version installed
●Application Version (program version) : Displays current program version installed
●Hard Disk Total Capacity: Displays total HDD capacity
●Hard Disk Remaining Capacity: Displays remaining storage space in HDD
Bluetooth
Alternative way to access Bluetooth mode:
Control Panel (under WinCE)
Search
●Detecting active Bluetooth device(s) near COWON Q5W. Bluetooth option (under ‘Bluetooth Device’ settings) must be turned on.
Pairing
●Perform ‘Pairing’ with Bluetooth device found from search
●Use the same passcode for COWON Q5W and Bluetooth device during ‘Pairing’ in order to establish Bluetooth connection.
Connect
●Establish connection between COWON Q5W and Bluetooth Device. ‘Pairing’ must be done in the initial connection.
Disconnect
●Disconnect selected Bluetooth device connection.
Delete, Delete All
●Delete Bluetooth Device list from the search
When settings window closed, Bluetooth connection remains active after connection is made properly.
COWON Q5W
