CRADLEPOINT CBA750 | USER MANUAL Firmware ver. 1.9.0
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 22
of 192.168.0.4. The starting IP address for the DHCP server needs to be 192.168.0.5 or above.
DHCP Lease Time. (Default: 1440 minutes [24 hours]). The amount of time a computer may have an IP address before it
is required to renew the lease. The initial lease designates the amount of time before the lease expires. If the lease
expires and the address is no longer needed, then another tenant may use the address. Units are in minutes, however a
value of zero (0) means the lease never expires.
Always Broadcast. If all the computers on the LAN successfully obtain their IP addresses from the router‟s DHCP server,
this option can remain disabled. However, if one of the computers on the LAN fails to obtain an IP address, it may have an
old DHCP client that incorrectly turns off the broadcast flag of DHCP packets. Enabling Always Broadcast will cause the
router to always broadcast its responses to all clients, thereby working around the problem (at the cost of increased
broadcast traffic on the LAN).
NetBIOS Announcement. Check this box to allow the DHCP
Server to offer NetBIOS configuration settings to the LAN
hosts. NetBIOS allows LAN hosts to discover all other
computers within the network, e.g. within “Net work
Neighborhood.”
Learn BIOS from W AN. If NetBIOS advertisement is
switched on, WINS information will be learned from the WAN
side, if available. Turn this setting off to configure manually.
NetBIOS Scope. This is an a dvanced setting and is normally
left blank. This allows the configuration of a NetBIOS
“domain” name under which n etwork hosts operate. This
setting has no effect if the Learn NetBIOS information from
WAN is activated.
NetBIOS Node Type. Indicates how network hosts are to
perform NetBIOS name registration and d iscovery. This
setting has no effect if the Learn
NetBIOS information from WAN is activated.