Cradlepoint CBA750

CRADLEPOINT CBA750 | USER MANUAL Firmware ver. 1.9.0

 Plug-in the USB Thumb Drive into the USB port on the CBA750

 The EC light will come on and blink while it is reading the binary file off the USB Thumb Drive

 When the EC light goes solid for 3 seconds or more, pull the USB thumb drive.

 At this point, the router will read the file, error check it and will load it. The router will reboot itself and will be

running the new firmware

NOTE: If the file is corrupt, the CBA750 will reboot and will not load the modem file. It is recommend that when you

are doing these en mass, the first few are manually checked by logging into the router with a computer and going to

http://192.168.0.1, login with the default password, and then check th e “Status” tab which will show the current router

firmware version. The default password is the last 6 character of the MAC address, which is located on a sticker on the

bottom.