Some removal of dry debris can be accomplished without removing the filter from the Vac. Slap your hand on top of
the power assembly while the Vac is turned off.
For best cleaning results due to accumu- lated dust, clean the filter in an open area. Cleaning SHOULD be done out- doors and not in the living quarters.
After filter removal from Vac, remove the dry debris by gently tapping the filter against the inside wall of your dust drum. The debris will loosen and fall.
For thorough cleaning of dry filter with fine dust (no debris), run water through it
as described under "Cleaning A Wet Filter".
Cleaning A Wet Filter
After filter is removed, run water through the filter from a hose or spigot. Take care that water pressure from the hose is not strong enough to damage filter. Dry the filter before storing.
Cleaning and Disinfecting the
Wet/Dry Vac
To keep your Wet/Dry Vac looking its best, clean the outside with a cloth damp- ened with warm water and mild soap.
To clean the drum:
1.Dump debris out.
2.Wash drum thoroughly with warm water and mild soap.
3.Wipe out with dry cloth.
Before prolonged storage or as needed
(i.e., waste water pick up) the drum should be disinfected.
To disinfect the drum:
1.Pour 1 gallon of water and 1 teaspoon chlorine bleach into the drum.
2.Let solution stand for 20 minutes, care- fully swishing every few minutes, mak- ing sure to wet all inside surfaces of the drum.
3.Empty drum after 20 minutes. Rinse with water until bleach smell is gone. Allow drum to dry completely before sealing the motor on the drum.
Casters
If your casters are noisy, you may put a drop of oil on the roller shaft to make them quieter.
Storage
Before storing your Vac, the drum should be emptied and cleaned. The cord should
be wrapped around the unit and the hose should be stored as described in this
manual. Accessories should be kept in the same area as the Vac so they can be
readily available. The Vac should be stored indoors.
,_, WARNING: To assure product
SAFETY and RELIABILITY, repairs and adjustment should be performed by Sears Service Centers, always using Sears replacement parts.
11
