If bladeISSQUAREtotable;
A. Checkpointer
If POINTERDOESNOTpointto the"0" markonthe bevelscale;
B. Loosenscrewandadjustpointer... usingmedium screwdriver.
If bladeisNOTSQUAREtotable..,the90° stopscrew mustbeADJUSTED.
1.Unscrewg0° STOPSCREWthreeor fourturnsusing 3/16in.setscrewwrench.
2.Tilt bladesothatit issquarewithtable.
3.Screw90° stopscrewINuntilit stops... checkonce againforsquarenessandreadjustscrew,if necessary.
4.CheckPOINTER... readjust, if necessary.
5.Tilt blade to 45 ° and adjust 45 ° STOP SCREW the
same way.
HEAD OF
COMBINATION SQUARE
90 °
STOP SCREW 45°
STOP SCREW
25
