8.To keep the miter gage grooves in line, use a flat blade screwdriver against the head of one of the low head capscrews in the miter gage groove to force the table alignment key firmly forward into the notch in the front table.

9.While holding the alignment key into the notch, tighten the other capscrew. Remove the screw- driver and tighten the remaining screw. Check that the miter gage grooves line up.

10.Check the operation of springs and tabs by removing the front table and reinstalling. Remove the table by lifting up on two spring tabs under front edge of the table until springs are free, then pulling forward.

SQUARING THE BLADE TO THE TABLE

To assure repeatability and accuracy, it is important to square the blade to the table and adjust the 0° position stop. This will guarantee that the blade will

return to the square position after the head has been moved for a bevel cut.

1.Locate the 1/4-20 x 1/2 oval point setscrew and use an 1/8-inch hex "L" wrench to install it in the hole located atthe left front of the rear table. The

setscrew has a lock patch that will make it hard to turn.

2.Slide the upper blade guard to its top most position and tighten knob.

3.Release bevel lock by pulling out bevel lock knob under left front edge of table.

4.Place a combination square on the table against the blade. Adjust the position of the blade to the table by turning the handwheel. When the blade

is flush against the combination square lock the bevel lock knob. Use a 1/8-inch hex "L" wrench

to set the 0° stop. Turn screw until it makes contact with the frame.

5.Unlock bevel lock, bevel the blade, then return to

0° position. Push in bevel lock knob and recheck blade to make sure it is square to the table.

NOTE: The combination square must be "true"

--see the beginning of the unpacking and

checking contents section for checking the combination square procedure.

0 r STOP SETSCREW

f

HEX"L" WRENCH

COMBINATION SQUARE

24

Page 24
Image 24
Craftsman 113.2472T0 owner manual Squaring the Blade to the Table

113.2472T0 specifications

The Craftsman 113.2472T0 is a benchtop table saw that stands out for its solid construction and versatile functionality, making it a favorite among both professional woodworkers and DIY enthusiasts. Its performance is bolstered by a robust 15-amp motor, providing enough power to handle various cutting tasks effectively. This motor allows the saw to deliver up to 5,000 RPM, ensuring clean and efficient cuts through different types of wood materials.

One of the main features of the Craftsman 113.2472T0 is its precision and accuracy. It comes equipped with a reliable rip fence system that can be easily adjusted for accurate cuts. The fence locks securely in place, reducing the likelihood of misalignment during use. Additionally, the saw includes a 10-inch carbide-tipped blade, which not only enhances durability but also improves cutting efficiency. The blade can be angled for precise bevel cuts, extending the tool's versatility for various woodworking projects.

Safety is a paramount concern in any workshop, and the Craftsman 113.2472T0 integrates several safety features to protect its users. The blade guard system not only shields the user from potential hazards but also allows for easy visibility of the cutting area. A push stick is included, enabling safe handling of smaller workpieces. Furthermore, the saw’s base is designed to provide stability, reducing vibration and ensuring a safe working environment.

In terms of portability, the Craftsman 113.2472T0 is designed with user convenience in mind. It features a compact design, which makes it easy to transport and store, whether in a dedicated workshop or a makeshift setup. The onboard storage for accessories keeps everything organized and within reach, streamlining the woodworking process.

The table itself is constructed from high-quality materials, offering excellent support and a smooth surface for woodworking tasks. With extensions available, the table size can be increased to accommodate larger materials, making it suitable for bigger projects. Overall, the Craftsman 113.2472T0 combines power, precision, and portability, making it an outstanding option for anyone needing a reliable and versatile table saw in their woodworking arsenal.