Craftsman 315.115510 manual Knowyour Drill, See Figure, Packing List

KNOWYOUR DRILL

See Figure 1.

The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

BIT STORAGE

Bits provided with the drill can be placed in the storage area, located on the base of the drill

CHARGER

The charger has a key-hole hanging feature for convenient, space-saving storage. Screws should be installed so that the center distance is 4-1/2 in.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/CENTER LOCK)

Your drill has a direction of rotation (forward/reverse/ center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.

UNPACKING

This product has been shipped completely assembled.

[] Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

[] Inspect the tool carefully to make sure no breakage or damage occurred during shipping.

[] Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.

[] If any parts are damaged or missing, please call 1-800-932-3188 for assistance.

PACKING LIST

3/8 in. Drill

Battery Pack

Charger

Double-ended Bit (2)

Operator's Manual

KEYLESS CHUCK

The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws.

LEVELS

Levels are located on the top and end of the motor housing to help keep the drill bit level during use.

TORQUE ADJUSTMENT RING

Your drill has a 24-position clutch. The torque adjustment ring can be turned to select the right amount of torque for your application.

TWO SPEED GEAR TRAIN

The two-speed gear train is designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of your drill for selecting either LO (1) or Hi (2} speed.

VARIABLE SPEED

The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.

_, WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Fail- ure to do so could result in possible serious personal injury.

A WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

A WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.