Craftsman 139.53315SR SET Receiver to Match, Transmitters Code Series with Receiver Code Switches

Radio Controls

EC.C. rules prohibit adjustments to or modification of receiver and transmitter circuitry except for changing the

code setting and replacing the transmitter battery THERE ARE NQ OTHER USER SERVICEABLE PARTS

Manufactured under ! or more of the fol_owlng U.S. patents: RE2g_525; 4,03"7,201; 4,750,1t8; 4,806,930

Your 53000SR SERIES garage door opener (with RECEIVER 'SR'CODE BUTTON) has been factory set to operate with the LARGE push button on the transmitter, The 3-function transmitter(s) can also activate additional garage door openers and/or light controls. 53000 and/or 53000SR SERIES.

Instructions are given below for matching the code in all transmitters, changing your code selection or using the transmitter(s) with other receivers,

MATCH/CHANGE THE CODE IN TRANSMITTER(S)

SET CODE SWITCHES IN ALL TRANSMITTERS TO MATCHING POSITIONS

1.Locate the code switches in transmitter(s), either by sliding batteq/compartment cover down or by removing cover screw and carefully turning case top overr

2.With a pen or a screwdriver, change the setting of one or more switch (to a (+), (-) or (0) position).

NOTE: Code switches 2 through g in ALL transmitters used to operate e receiver must be set to match. (Code switch 1 on a 34unction transmitter is neutral Set it to ANY position° It will not affect the code selected).

'---	3	Standard			3-Function
		3*Function		"---3_Function	Mini Transmitter
				Trat_s miller
					Code Switches
] t _"_	.... _-_---.Code	Switches	__!i	Standard	0-9}
				"*-COde Switches

,,

SET RECEIVER TO MATCH

53000SR SERIES (WITH RECEIVER CODE BUTTON)

Garage Door Openers and Light Controls

(illustration A shows a garage door opener receiver)

	3 FUNCTION	A	GARAGE DOOR
	TRANSMITTER	_	OPENER	RECEIVER
			(Wilh SR Code		Button)
Select	a trar_smi[ter	push	AE_ v_rr	e,_K	'tEL
burton	to operate receiver		%%%		%

(2.9)

TRANSMITTER(S) CODE

53000 SERIES (WITH RECEIVER CODE SWITCHES)

Garage Door Openers and Light Controls (Illustration B shows a garage door opener receiver)

Push Button (-}

B 3 FUNCTION

TRANSMITTER

Select a transmitter

Push Bu_push butlon to operate receiver

Push Button (el

YELGARAGE DOOR

SR tnd[caler

Code Button Light

3.Press the RECEIVER SR code button on the right side panel of opener (Illustration A) The indicator light will turn ON.

4, STAND AWAY FROM THE DOOR and press the selected push button on the transmitler The indicator

%

\

Code Switch #t ('l

Receiver wiiI operale with _ransmitters'

large push butlon

OPENER(With CodeRECEIVERSwitches)

S{ide receiver code

switch #1 to posit.ion that matches r_e_ected transmitter push buItoo (+; 0 or -)

light will turn OFF and door will move, Receiver and transmitter codes now match and the opener will operate with the selected push button on the transmitter,

NOTE: tf transmitter push button is not pressed within 30 seconds, the indicator light wilt turn OFF. Begin again at Step 3.

TO USE THE TRANSMITTER(S) WITH OTHER 53000SR SERIES RECEIVERS: Select another transmitter push button to operate the Light Control or additional garage door opener, Make sure all transmitters used to operate

receiver are set to the same code (Steps 1 and 2) Repeat Steps 3 and 4,

3Locate the receiver code switches Set code switch #1 to match transmitter push button you want to use with that receiver (+), (0) or (-). Refer to illustration (B).

4.Hold a transmitter (with code switches visible) along- side the receiver. Beginning with RECEIVER code

switch #2, match the position of each transmitter switch,

TO USE THE TRANSMITTER(S) WITH OTHER 53000 SERIES RECEIVERS: Select another transmitter push button to operate the Light Control or additional garage door opener. Make sure all transmitters are set to a match- ing code (Steps I and 2), Repeat Steps 3 and 4

' ,,,,,,u i i , ,,,,, ,i ,,t ,, ii

19