Craftsman 15206 manual blow, However, 30-45, Eng

Become familiar with these terms before operating the unit.

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per min- ute; a unit of measure of air delivery.

PSI: Pounds per square inch gauge; a unit of measure pressure.

Code Certification: Products that

bear one or more of the following marks: UL_>*,CUL, ETL_*>*,CETL, have been evaluated by OSHA certified independent safety laboratories and meet the applicable Standards for Safety.

*UL_ is a registered trademark of Underwriters Laboratories and ETL® is a registered trademark of Electrical Testing Laboratories.

Cut-In Pressure: While the motor is off, air tank pressure drops as you continue to use your accessory. When the tank pressure drops to a certain low level the motor will restart auto- matically. The low pressure at which the motor automatically restarts is called "cut-in" pressure.

Cut-Out Pressure: When an air com- pressor is turned on and begins to run, air pressure in the air tank begins to build. It builds to a certain high pressure before the motor automati- cally shuts off, protecting your air tank from pressure higher than its capacity. The high pressure at which the motor shuts off is called "cut-out" pressure. Branch Circuit: Circuit carrying elec- tricity from electrical panel to outlet.

Includes:	brad nailer, nails, 25'recoil						1/4"	male quick-connect plugs, PTEE-
air hose,	inflation		needle,		tapered	blow	thead	seal tape, I/4"		female	quick-
gun nozzle,		blow	gun adapter, blow				connect		body, hex wrench(2) and oil.
gun safety nozzle, blow gun, tire chuck,
This air compressor				pump is capable			average duty cycle be maintained;
of running		continuously.			However,	to	that	is, the air compressor			pump
prolong	the life of your air compressor,						should		not run more	than	30-45
it is recommended				that	a 50%-75%		minutes		in any given	hour.

9 - ENG