Manuals / Craftsman / Lawn and Garden / Lawn Mower

Craftsman 247.370320 owner manual Maintenance, Service and Adjustments

Models: 247.370320

1 19
Download 19 pages 52.09 Kb
Page 10
Image 10

MAINTENANCE

GENERALRECOMMENDATIONS

Follow the Service Recommendation Schedule on page 11.

MOWER

BLADE CARE

Your mower will work better with a sharp blade.

PLY BEFORE PERFORMING ANY MAIN-

_b WARNING: DISCONNECT POWER SUP-

TENANCE OR ADJUSTMENTS.

TO REMOVE BLADE (See figure 9):

•Turn mower on its side.

•Use a block of wood between blade and mower deck to prevent blade from turning when nut is removed. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Remove hex nut, and open blade insulator.

•Remove cotter pin, blade nut, flat washer, blade in- sulator and carriage bolts.

Blade

MotorShaft _Adapter

 

Flat

 

.Washer

Hex

Blade Mounting

 

Nut

Insulator

 

FIGURE 9.

TO REPLACE BLADE (See figure 9):

Use only a Sears authorized replacement blade to get the best cutting results. Do not use substitutes.

NOTE: All parts must be assembled in the exact order as shown.

•Fit blade in adapter. Be sure trailing edge of blade is up towards motor.

•Tighten blade nut securely (30-35 ft. Ibs. torque).

•Re-insert cotter pin and bend ends to secure.

NOTE: If after tightening nut, the slot in nut is not aligned with hole in shaft, tighten nut just enough to allow cotter pin insertion.

WARNING: A LOOSE BLADE CAN BE DANGEROUS.

TO SHARPEN BLADE

NOTE: We do not recommend sharpening the blade-- but if you do, be sure blade is balanced.

•The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

Care should be taken to keep the blade balanced.

An unbalanced blade will cause excessive vibration

when running and eventual damage to mower and motor.

To check blade balance, drive a nail into a beam or

wall. Leave about one inch of straight nail exposed. Place center hole of blade over the head of the nail.

If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, blade is not balanced. Sharpen the heavy end until the blade is balanced.

CLEANING

WARNING: DISCONNECT POWER SUP- PLY BEFORE CLEANING YOUR MOWER.

•Remove any build-up of grass and leaves on or around motor cover. DO NOT USE WATER.

Clean the underside of your mower after each use by turning the mower on its side and scraping to remove any build-up of grass, leaves, dirt or other matter. DO NOT USE WATER.

•Occasionally use a dry cloth to wipe mower,

•Wash grass bag periodically with water. Allow to dry thoroughly in the shade. Do not use heat.

IMPORTANT: Under normal usage, the grass bag is subject to wear and should be checked periodically. Be certain any replacement bag complies with the mower manufacturer's specifications.

SERVICE AND ADJUSTMENTS

REARTRAIL SHIELD

The rear trail shield, attached between the rear wheels

of your mower, is provided to minimize the possibility that objects will be thrown out the rear of the mower

toward the operator. If the shield becomes damaged, it should be replaced.

lO

TO ADJUSTCUTTINGHEIGHT

Refer to "ADJUST CUTTING HEIGHT" in Operation section of manual.

Page 9 Page 11
Page 10
Image 10
Craftsman 247.370320 owner manual Maintenance, Service and Adjustments
Page 9 Page 11

247.370320 specifications

The Craftsman 247.370320 is a powerful and versatile lawn tractor designed for homeowners who take lawn care seriously. With its robust features and reliable technology, this lawn tractor enables efficient mowing, ideal for medium to large-sized yards.

One of the standout features of the Craftsman 247.370320 is its powerful engine. Equipped with a 24 HP Briggs & Stratton engine, it delivers ample power to tackle tough mowing tasks. The engine starts easily, ensuring you can quickly get to work without frustrating delays. This high-performance engine is paired with a smooth hydrostatic transmission, which allows for seamless speed changes and easier maneuvering across different terrains.

The mower deck on the Craftsman 247.370320 offers a generous 54-inch cutting width, making it highly efficient when mowing large lawn areas. The deck height is adjustable, allowing users to customize the cutting height of the grass according to their preference or the specific type of grass being mowed. With blade engagement features, users can turn the blades on and off easily, adding convenience to the mowing process.

Additionally, the tractor features a comfortable high back seat which enhances user comfort during extended mowing sessions. The ergonomic design allows for optimal control and reduces fatigue, making it ideal for larger properties.

Technology-wise, the Craftsman 247.370320 integrates advanced safety features. The automatic safety shut-off system ensures the blades stop rotating when the operator leaves the seat, enhancing safety while operating the machine.

Furthermore, the lawn tractor includes a space for attachments, providing versatility for tasks beyond mowing such as leaf collection or snow removal during winter. This adaptability enhances its value for homeowners who wish to maintain their properties year-round.

In summary, the Craftsman 247.370320 is built for performance, comfort, and versatility. Its powerful engine, adjustable mowing deck, and user-friendly features make it a solid choice for any homeowner seeking an efficient solution for lawn maintenance. The integration of safety measures and support for various attachments further cement its reputation as a reliable and practical lawn tractor. Investing in this model promises to elevate your yard care experience significantly.