OPERATION
|
| Bag | Throttle Control | Choke Control |
|
|
| ||
| Starter |
|
|
|
| Handle | Bag Handle |
| |
|
|
| ||
|
|
| Oil Fill |
|
|
|
| Gasoline Fill |
|
Blower |
| Chipper |
| Nozzle |
Chute |
| Chute |
| |
Nozzle Height 
Adjustment Lever
Figure 9
Now that you have set up your yard vacuum for operation, get acquainted with its controls and features. These are described below and illustrated on this page. This knowledge will allow you to use your new equipment to its fullest potential.
bag
Collects shredded material fed through the chipper chute or vacuumed through the nozzle.
WARNING
The operation of any yard vacuum can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear the safety glasses provided with this unit or eye shields while operating or performing any adjustments or repairs on it.
Chipper Chute
Blower Chute
When attached to unit, the blower chute is used to discharge yard waste such as leaves, pine needle, or small twigs across yard.
Bag Handle
Used to grasp bag in order to assist in attaching, removing, and emptying bag. See Figure 9.
Allows twigs and small branches up to
nozzle
Yard waste such as leaves or pine needles can be vacuumed up through the nozzle for shredding.
Nozzle Height Adjustment Lever
Used to adjust the nozzle ground clearance ranging approximately from 5/8” to 4 1/8”.
Meets ANSI Safety Standards
Craftsman Yard Vacuums conform to the safety standard of the American National Standards Institute (ANSI).
12
