Craftsman 247.795861 CUSTOMER RESPONSDBnLITIES, Generalrecommendations, Engine, Chipper-Shredder

CUSTOMER RESPONSDBnLITIES

MAINTENANCE SCHEDULE						,/___//_O_/
FILL IN DATES						/_	,/ _/
REGULAR.s		SERVICE			!	/	/
F-
	Oil Pivot			Points
O	Clean		Shredder				q
rt
	Check		Engine Oil			_/
	Change			Engine Oil			_]
	Service			Air Cleaner

zClean Engine Cylinder

Spark Plug

Muffler

_/ CHECK

GENERALRECOMMENDATIONS

WARNING: ALWAYS STOP THE ENGINE AND DISCONNECT THE SPARK PLUG

WIRE BEFORE PERFORMING ANY

MAINTENANCE OR ADJUSTMENTS.

e Periodically check all fasteners and be sure they are tighL

eFollow the Maintenance Schedule above

CHIPPER-SHREDDER

LLIBRICATION

Lubricate the pivot paints on the release bar, hopper assembly, chute deflector and chipper chute once a season using a light oil

_ / ,_/a,,o_/^_,co/

/SERVICE....... DATES

_/

_1

_/

_/

_/_/

"4_/

_/

NOTE: Although multi-viscosity oils (SE30, 10W30, etc ) improve starting in cold weather, these multi- vis- cosity oils will result in increased oil consumption when used above 32°F Check your oil level more fre- quently to avoid possible engine damage from run- ning low on oil

Your four-cycle engine will normally consume some oil--therefore, check engine oil level regularly approx- imately every five hours of operation and before each usage Stop engine and wait several minutes before checking oil level. With engine level, the oil must be to FULL mark on dipstick (refer to figure 12). Change engine oil after the first five hours of operation, and every twenty-five hours thereafter.

ENGINE

ENGINE OIL

Only use high quality detergent oil rated with API ser- vice classification SG Select the oil'sviscosity grade according to your expected operating temperature

Colder -._ 32°F " Warmer

5W30 M SAE 30

To Drain Oil:

eDrain oil while engine is warm

a_ Remove oil drain plug Refer to figure 11. Catch oil in a suitable container

b When engine is drained of all oil, replace drain plug securely.

®Refill with fresh oil Refer to GAS AND OIL FILL- UP section,

eReplace dipstick.

11