•Reassemble the new friction wheel rubber to the friction wheel assembly tightening the six screws in rotation and with equal force.
•Position the friction wheel assembly up onto the pin of the shift rod assembly and slide the shaft through the friction wheel. See Figure 30.
•Slide the shaft into the hex I.D. of the sprocket, the spacer and the left ball bearing and secure with the bell washer and hex bolt.
Carburetor
WARNING: If any adjustments are made to the engine while the engine is running (e.g. carburetor), keep clear of all moving parts. Be careful of heated surfaces and muffler.
If you think the carburetor needs to be adjusted, see your nearest authorized Tecumseh Service Outlet.
|
|
| Sprocket |
| Shift Rod |
|
| Spacer |
| Assembly | |
|
|
|
| ||
|
| Bearing |
| Pin | |
| |||||
Washer |
|
| Shaft | ||
|
| ||||
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
Bolt
Bracket
Support
Figure 30
Friction Wheel
23
