Holdyour sawfirmly with both hands.See Figure

TOP VIEW OF SAW

14.

 

 

OF SAW

BLADE

GUIDENOTCH

RIGHT

Fig. 14

Squeeze the switch trigger to start your saw. Always let the blade reach full speed, then guide your saw into the workpiece.

_IL WARNING: The blade coming in contact with the workpiece before it reaches full speed could

cause your saw to "kickback" towards you resulting in serious injury.

When making a cut use steady, even pressure. Forcing causes rough cuts, could shorten the life of your saw and could cause "kickback."

REMEMBER:

When sawing through work, the lower blade guard does not cover the blade, exposing it on the underside of work. Keep your hands and fingers away from cutting area. Any part of your body coming in contact with the moving blade will result in serious injury.

After you complete your cut release the trigger and allow the blade to come to a complete stop. Do not remove your saw from workplece while the blade is moving.

_l, CAUTION: When lifting your saw from the workpiece, the blade is exposed on the

underside of your saw until the lower blade guard closes. Make sure lower guard is closed before setting your saw down on work surface.

TO CROSS CUT OR RIP CUT

When making a cross cut or rip cut, align your line of cut with the outer blade guide notch on the saw base as shown in figure 15.

Page

ALIGNOUTERBLADEGUIDENOTCHON

SAW BASEWITH LINEOF CUTAS SHOWN GUIDELINE

WHENMAKINGCROSSCUTSOR RIP CUTS Fig. 15

Since blade thicknesses vary, always make a trial cut in scrap material along a guideline to determine how much, if any, the guideline must be offset to produce an accurate cut. NOTE: The distance from the line of cut to the guideline is the amount you should offset the guideline.

OPTIONAL EDGE GUIDE (RIP GUIDE)

Use a rip guide when making rip cuts up to five inches wide. It helps prevent the blade from twisting in a cut. The blade twisting in a cut can cause kickback. A rip guide is available at your Sears Catalog Order or

Retail Store.

TO ASSEMBLE RIP GUIDE

•Unplug your saw.

_1= WARNING: Failure to unplug your saw could result in accidental starting causing possible serious personal injury;

•Place rip guide through holes in saw base as shown in figure 16.

EDGEGUIDEPLACERIP GUIDETHRU HOLES

Fig. 16

12

Page 11 Page 13
Page 12
Image 12
Craftsman 315.10834, 315.10833 owner manual To Assemble RIP Guide
Page 11 Page 13

315.10833, 315.10834 specifications

The Craftsman 315.10834 and 315.10833 are powerful and versatile tools designed for both professionals and DIY enthusiasts alike. Engineered with a focus on performance and ease of use, these models showcase the reliability that Craftsman is known for in the power tool industry.

One of the standout features of the Craftsman 315.10834 is its robust 15-amp motor, offering ample power to tackle various tasks, from simple home repairs to more demanding projects. Its variable speed control allows users to adjust the RPMs, ensuring optimal performance on a wide range of materials. This flexibility makes it suitable for an array of applications, whether you're drilling through wood, metal, or plastic.

The Craftsman 315.10833 complements its counterpart with an equally impressive set of features. This tool includes a high-torque motor designed to deliver maximum power without compromising on performance. Its dual-speed settings offer enhanced control when working on different tasks, enhancing user experience and allowing greater precision in every application.

Both models include an ergonomic design that enhances comfort during extended use. The soft-grip handle reduces vibration and provides a firm grip, allowing for improved accuracy and reduced fatigue. The tools are also designed to be lightweight, making them easier to handle and maneuver in tight spaces or at awkward angles.

In terms of safety, the Craftsman 315.10834 and 315.10833 come equipped with built-in safety features such as a trigger lock, which prevents accidental starts and ensures added security during operation. The durable housing protects the internal components, ensuring longevity and resilience, even in demanding conditions.

These Craftsman models also prioritize ease of use with quick-change chuck systems that allow for rapid bit swaps without the need for additional tools. This feature significantly enhances productivity, especially during multi-tasking scenarios.

The technologies integrated into both tools reflect a commitment to innovation. Their powerful motors are complemented by cooling systems designed to prevent overheating, allowing for sustained use without compromising performance. Furthermore, the compatibility with a wide range of accessories makes them a versatile addition to any tool collection.

In summary, the Craftsman 315.10834 and 315.10833 are distinguished by their powerful motors, ergonomic designs, safety features, and versatility. Ideal for both hobbyists and professionals, these tools not only make tasks easier but also elevate the overall quality of the work performed. Whether you are drilling, driving, or mixing, these Craftsman tools stand ready to meet your needs with efficiency and reliability.
Top Page Image Contents