Adjust rip guide to the length needed for the cut.

Tighten edge guide screw securely.

When using a rip guide, position the face of the rip guide firmly against the edge of workpieca. This makes for a true cut without pinching the blade. The guiding edge of workplace must be straight for your cut to be straight. Use caution to prevent the blade from binding in the cut.

When making a bevel cut hold your saw firmly with both hands as shown in figure 18.

TO BEVEL CUT

The angle of cut of your saw may be adjusted to any desired setting between zero and 51.5 ° . NOTE: When making cuts at 51.5 ° blade should be set at full depth of cut, with edge guide screw removed.

When making 45 ° bevel cuts, there is a notch in the saw base to help you line up the blade with the line of cut. See Figure 17.

BEVEL

SCALE

LOWER

BLADEGUARD

Fig. 18

Rest the front edge of the base on the workpiece. Squeeze the switch trigger to start your saw. Always let the blade reach full speed, then guide your saw into the workpiece.

_1= WARNING: The blade coming in contact with the workpiece before it reaches full speed could

cause saw to "kickback" toward you resulting in serious injury.

After you complete your cut release the trigger and allow the blade to come to a complete stop. After the blade has stopped, lift your saw from the workplace.

TO ADJUST BEVEL SEI-I'ING

Unplug your saw.

NOTCH

ALIGN INNERBLADEGUIDENOTCHON SAW

BASE WITH LINEOF CUTAS SHOWNWHEN MAKING45° BEVELCUTS

BEVEL

ADJUSTMENT

WING NUT

Fig. 17

_1, WARNING: Failure to unplug your saw could result in accidental starting causing possible

serious personal injury.

Loosen wing nut. See Figure "17.

Raise motor housing end of saw until you reach

desired angle setting on bevel scale. See Figure 17.

Tighten wing nut securely.

Align your line of cut with the inner blade guide notch on the saw base when making 45 ° bevel cuts.

Since blade thicknesses vary and different angles require different settings, always make a trial cut In scrap material along a guideline to determine how much you should offset the guideline on the board to be cut.

_i, WARNING: Attempting bevel cut without wing nut securely tightened can result in serious

injury.

Page 13

Page 13
Image 13
Craftsman 315.10833, 315.10834 owner manual To Bevel CUT, To Adjust Bevel SEI-IING, Bevel Scale Lower Bladeguard

315.10833, 315.10834 specifications

The Craftsman 315.10834 and 315.10833 are powerful and versatile tools designed for both professionals and DIY enthusiasts alike. Engineered with a focus on performance and ease of use, these models showcase the reliability that Craftsman is known for in the power tool industry.

One of the standout features of the Craftsman 315.10834 is its robust 15-amp motor, offering ample power to tackle various tasks, from simple home repairs to more demanding projects. Its variable speed control allows users to adjust the RPMs, ensuring optimal performance on a wide range of materials. This flexibility makes it suitable for an array of applications, whether you're drilling through wood, metal, or plastic.

The Craftsman 315.10833 complements its counterpart with an equally impressive set of features. This tool includes a high-torque motor designed to deliver maximum power without compromising on performance. Its dual-speed settings offer enhanced control when working on different tasks, enhancing user experience and allowing greater precision in every application.

Both models include an ergonomic design that enhances comfort during extended use. The soft-grip handle reduces vibration and provides a firm grip, allowing for improved accuracy and reduced fatigue. The tools are also designed to be lightweight, making them easier to handle and maneuver in tight spaces or at awkward angles.

In terms of safety, the Craftsman 315.10834 and 315.10833 come equipped with built-in safety features such as a trigger lock, which prevents accidental starts and ensures added security during operation. The durable housing protects the internal components, ensuring longevity and resilience, even in demanding conditions.

These Craftsman models also prioritize ease of use with quick-change chuck systems that allow for rapid bit swaps without the need for additional tools. This feature significantly enhances productivity, especially during multi-tasking scenarios.

The technologies integrated into both tools reflect a commitment to innovation. Their powerful motors are complemented by cooling systems designed to prevent overheating, allowing for sustained use without compromising performance. Furthermore, the compatibility with a wide range of accessories makes them a versatile addition to any tool collection.

In summary, the Craftsman 315.10834 and 315.10833 are distinguished by their powerful motors, ergonomic designs, safety features, and versatility. Ideal for both hobbyists and professionals, these tools not only make tasks easier but also elevate the overall quality of the work performed. Whether you are drilling, driving, or mixing, these Craftsman tools stand ready to meet your needs with efficiency and reliability.