Craftsman 316.35084 manual SAFETY mNSTRUCTmONS, WARNmNG: If0orrecused,the.y

The purpose ofsafetysymbols istoattractyour atten- tiontopossibledangers,The safetysymbols,and their explanations,deserveyour carefulattentionand under- standing,The safetywarningsdo notby themselves eliminateany danger,The instructionsorwarningsthey

givearenotsubstitutesforproperaccidentprevention measures.

SYMBOL MEANmNG

NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.

Read the Operator's Manual(s) and follow aii warnings and safety instructions,

Failure to do so can result in serious injury to the oper- ator and/or bystanders,

SYMBOL MEANING

inJury,

,,IMPORTANT

READ ALL INSTRUCTIONS PLAN AHEAD

SAFETY mNSTRUCTmONS ,,

°Carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and the muffler away from your body,

WARNmNG: If0orrecused,the.y

chain saw usa

)[easant and safe work,always strictly corn- with the safety rules that are contained in manual.

•Read the instructions carefully. Be familiar with the con- trois and proper use of the unit.

Do not operate tMs unit when tked, ill or under the influ- ence of alcohol, drugs or medication.

Children must not operate the unit. Teens must be accompanied and guided by an adult.

•Only responsible individuals who are familiar with the instructions may operate the chain saw (no one under the age of 16). Provide parental supervision at all times.

°Secure hair above shoulder length. Do not wear loose clothing orjeweky; they can get caught in moving parts.

Inspect the unit before use. Replace all damaged parts prior to starting. Make sure the unit is in original operat- ing condition before starting.

Know the controls and know how to stop the chain saw quickly.

When transporting your chain saw, use the appropriate guide-bar scabbard (sheath).

•Wear protective gear. Always use steel-toed safety footwear with non-slip soles; snug-fitting clothing; heavy-duty non-slip gloves; eye protection such as non-fogging, vented goggles or face screen; an approved safety hard hat; and hearing protection. Regular users should have hearing checked regularly as chain saw noise can damage hearing.

OPERATE YOUR SAW SAFELY

•Do not operate a chain saw that is damaged, not cali- brated properly or not fully assembled. Always replace chain, bar, chain brake, and other parts immediately if damage occurs.

Do not apply excess force to the chain saw at the end of the cut. You may lose control of the unit when the cut has been completed.

Keep all parts of your body away from the chain when the engine is running,

•Never start or run the unit inside a closed room or

building, Operate this unit only in a well ventilated out- door area.

Use the unit only in daylight or good artificial light.