Craftsman 3300 manual Quick-Startdemonstration, I. Supplies Needed, II. Position the Detector

QUICK-STARTDEMONSTRATION

I. Supplies Needed
• A Nail	• A Quarter
• A Pull-Tab from a beverage can	• A Zinc Penny (dated after 1982)

II. Position the Detector

a. Place the detector on a table, with the search coil

hanging over the edge.

(or better, have a friend

hold the detector, with the coil off the ground)

b. Keep the search coil away from walls, floors, and metal objects.

c. Remove watches, rings and other jewelry or metal objects from hands and wrists.

d. Turn off appliances or lights that cause electromagnetic interference. e. Pivot the search coil back

toward the detector body.

III. Power Up

Press the POWER touch pad.

IV. Wave each Object over the

Search Coil

a.Notice a different tone for each object. Bass Tone: Nail

Low Tone: Pull-Tab

Medium Tone: Zinc Penny

High Tone: Quarter

b.Motion is required. Objects must be in motion over the search coil to be detected.

V. Press the DISC A-M touch pad

The detector will beep twice

and 3 “R”’s will appear under the iron indicators.

Quick-Start Demo continued on next page

7