Carton Contents, Assembly | Craftsman 358.352680

prone to circulation disorders or abnormal swelling. Prolonged use in cold weather has been linked to blood

vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss

of feeling in the fingers, hands, or joints discont nue the use of this tool and seek medical attention. An

anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis

must closely monitor their physical condition and the condition of this tool.

CHAIN BRAKE If this saw is to be used

for commercial logging, you must order and install a chain brake to comply with Federal OSHA Regulations for Com-

mercial Logging. Contact your Sears Service Center or call 1-800-235-5878:

mufflerand spark arresting screen

whichmeets the requirementsof CaliforniaCodes4442 and 4443. All

U.S. forestlandand the statesof

California,Idaho,Maine, Minnesota, New Jersey,Oregon,and Washington requireby lawthat many internal combustion enginesbe equippedwith a

spark arrestor screen.If you operatea chainsaw in a state or localewhere

such regulationsexist, you are legally I responsiblefor maintainingthe operatingconditionof theseparts.

Failureto do so is a violationof the law.

Refer to Customer Responsibilities chart in the MAINTENANCEsection.

STANDARDS: This chainsaw is listed by UnderwritersLaboratories,inc. in accordance with AmericanNational Standards for Gasoline-PoweredChain

Saws Safety Requ;rements(ANSI

SPARK ARRESTOR: Your saw is	B175.1-1991).
equipped with a temperature timing

CARTON CONTENTS

Check carton contents against the fol- lowing list.

Model 358.352680

•Chain Saw (fully assembled)

•Bar tool

•Chain

,Carrying Case

•Gloves

•Gas Can

•Bar & Chain Lube

•2-cycle engine oil

o Examine parts for damage. Do not use damaged parts.

•If you need assistance or find that

parts are missing or damaged, please call 1-800-235-5878.

NOTE: It is normal to hear the fuel filter rattle in an empty fuel tank.

Your unit has been factory tested and the carburetor precisely adjusted. As a

result you may smell gasoline or find a drop of oil/fuel residue on the muffler when you unpack the unit.

Your saw is fully assembled; no assembly is necessary.